Manufactured by Merlo, this is the P 28.9 EVS telehandler. Find and download detailed specs and data sheets for this machine here.... Read more
Manufactured by Merlo, this is the P 28.9 EVS telehandler. Find and download detailed specs and data sheets for this machine here.
This telehandler is built to provide up to 62kW or 83 horse power, delivered from its powerful Perkins engine to the 7.05t P 28.9 EVS machine. The Merlo P 28.9 EVS can be grouped in the smallest machine segment in the telehandlers category. 13,6x24 is the size of standard tyres equipped on this Merlo P 28.9 EVS telehandler. Max. Horizontal reach of this P 28.9 EVS model from Merlo is 5,95m. It can lift 2.8t of nominal load with a 500mm centre of gravity. The P 28.9 EVS has a lift height of 8.7m, to which it can lift 1.5t. At full forward reach, this model can control a weight of 0.6t.
Inclination correction, Diesel particulate filter and Side displacement are not provided on this model as of 1999. There are more detailed specifications and machine descriptions available in the original Merlo P 28.9 EVS specs data sheet. Available in German, LECTURA Specs offers a free download of highly detailed specifications and machine descriptions of this model.
This model can be acquired for a list price between €54,000 and €69,000. Production of the P 28.9 EVS stopped in 1999. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
Based on other telehandlers specifications and pricing variations, the Merlo P 28.9 EVS can be considered similar to the Manitou MT 728-4 T, John Deere 3200 and Manitou MVT 628 T. At present, 56 other telehandlers, which range from 2.7t up to 12t are produced by Merlo. Of these, TF 33.7-115, TF 50.8 T-120 and also TF 50.8 T-CS-156-CVTRONIC are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest Merlo P 28.9 EVS specs data sheet on LECTURA Specs today!
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
See the ERA equipment CO2 Calculator to estimate the carbon emissions per hour of use of the Merlo P 28.9 EVS or alternative Telehandlers.
The footprint calculation can be carried out considering different transportation scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Merlo P 28.9 EVS
Nominal load at COG: 2.8 t
Standard tyres: 13,6x24
Centre of gravity: 500 mm
Transmission type: Hy
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 12x18
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 400/70-20
Centre of gravity: 500 mm
Transmission type: Hy
Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can navigate you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
.jpg)
Kalmar, part of Cargotec, is celebrating a significant milestone with the completion of the 6,000th machine, a reachstacker, at its manufacturing plant in Shanghai, China.
What do you think about this machine?
Check out 2 Merlo products here
.jpg)
.png)
