Merlo is the manufacturer of the telehandler model P 28.7 EVS. Find and download detailed specs and data sheets for this machine h... Read more
Merlo is the manufacturer of the telehandler model P 28.7 EVS. Find and download detailed specs and data sheets for this machine here.
Equipped with a powerful Perkins engine, this P 28.7 EVS 6.65t machine can provide 62kW or 83 horse power for the telehandler. The Merlo P 28.7 EVS can be grouped in the smallest machine segment in the telehandlers category. The size of standard tyres for this Merlo P 28.7 EVS is 405/70-24. It can operate with up to 3,58m of horizontal reach. With a center of gravity of 500mm, this model can lift a nominal load of 2.8t. The P 28.7 EVS has a lift height of 6.95m, to which it can lift 2.8t. The capacity of this model at full forward reach is 1.1t.
StVZO Equipment, Diesel particulate filter and Side displacement are not provided on this model as of 2001. There are more detailed specifications and machine descriptions available in the original Merlo P 28.7 EVS specs data sheet. Specification sheet is available for a free download in German - providing the machine descriptions and more detailed specs about this particular model.
The production stopped in 2001, where this P 28.7 EVS was available at a new list price between €49,000 and €62,000. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
Comparisons of the P 28.7 EVS Merlo with other telehandler models reveal that, based on specifications and pricing, the model is similar to the Manitou MT 728-2 T, John Deere 4500 TJ as well as Manitou MT 728-2. Merlo currently produces 56 other telehandlers, which range from 2.7t up to 12t - the most visited on LECTURA Specs are TF 33.7-115, TF 50.8 T-120, TF 50.8 T-CS-156-CVTRONIC. Want more detailed specifications? Download the latest Merlo P 28.7 EVS specs data sheet on LECTURA Specs today!
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
See the ERA equipment CO2 Calculator to estimate the CO2 emissions per hour of use of the Merlo P 28.7 EVS or alternative Telehandlers.
The carbon footprint calculation can be carried out based on different energy consumption scenarios or other variables.
or go to the ERA Equipment CO2 Calculator to find out how to optimise your carbon footprint.
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Merlo P 28.7 EVS
Nominal load at COG: 2.8 t
Standard tyres: 405/70-24
Centre of gravity: 500 mm
Transmission type: Hy
Nominal load at COG: 2.8 t
Standard tyres: 17.5 LR 24
Centre of gravity: 500 mm
Transmission type: W
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 12x18
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 400/70-20
Centre of gravity: 500 mm
Transmission type: Hy
Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an operator, LECTURA can advise you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
.jpg)
Kalmar, part of Cargotec, is celebrating a significant milestone with the completion of the 6,000th machine, a reachstacker, at its manufacturing plant in Shanghai, China.
What do you think about this machine?
Check out 2 Merlo products here
.png)
.jpg)
.png)
.png)
