MT 625 H Manitou Telehandler Specs & Dimensions (2016 - 2020)

The Manitou MT 625 H is a telehandler manufactured from 2016 to 2020. It has a weight of 4.8 tons and a transport length of 3.9 me…

The Manitou MT 625 H is a telehandler manufactured from 2016 to 2020. It has a weight of 4.8 tons and a transport length of 3.9 meters. The maximum horizontal reach is 3.4 meters, and it can lift loads up to 2.5 tons at the nominal load center of gravity. The lifting height is 5.85 meters, and it has a capacity of 0.8 tons at full forward reach. The center of gravity is located at 500 millimeters. It has a travel speed of 25 km/h and a capacity of 2 tons at full lift height. The transport width is 1.81 meters, and the transport height is 1.92 meters.

Telehandlers Manitou MT 625 H

Visit Manitou live at

Technical specs - MT 625 H Manitou

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
2.5 t
Model series
MT
Centre of gravity
500 mm
Standard tyres
12-16.5 12 PR SKS
Transmission type
HY
Max. Reach horizontal
3.4 m
Capacity at full forward reach
0.8 t
Lifting height
5.85 m
Capacity at full lift height
2 t
Weight
4.8 t
Transport length
3.9 m
Transport width
1.81 m
Transport height
1.92 m
Travel speed
25 km/h
Engine manuf.
Kubota
Engine type
V3307-DI-T-E4B
Engine power
55.4 kW
Displacement
3.331 l
Max. torque
265/1400 Nm
No. of cylinders
4
Emission level
Tier 4 f

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, cylinder bore x stroke, cab position...

More technical details, like: max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, revolutions at max torque, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, telematics available, platform, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, service brake - type, dimension configuration, length - at ground, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
StVZO Equipment
No
Inclination correction
No
Side displacement
No

Download datasheets (PDF)

Events

Visit Manitou live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Manitou Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Used Manitou Telehandlers for sale | Forklift-International
Go to the offers

Compare Manitou MT 625 H with similar Telehandlers

Manitou MT 625 H

Manitou MT 625 H

Nominal load at COG:
2.5 t
Model series:
MT
Centre of gravity:
500 mm
Standard tyres:
12-16.5 12 PR SKS
Manitou BT 420

Manitou BT 420

Nominal load at COG:
2 t
Model series:
BT
Centre of gravity:
500 mm
Standard tyres:
265/70 R 19/28
Bobcat T 2556

Bobcat T 2556

Nominal load at COG:
2.5 t
Centre of gravity:
500 mm
Standard tyres:
400/70x20
New Holland LM 410

New Holland LM 410

Nominal load at COG:
2.8 t
Model series:
LM
Centre of gravity:
500 mm
Standard tyres:
17.5 LR 24
JCB 520-55

JCB 520-55

Nominal load at COG:
2 t
Model series:
520
Centre of gravity:
500 mm
Standard tyres:
12.5/80-18

Do you want to see more detailed comparison?

Show me!

Sell Manitou MT 625 H

Telehandlers appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Manitou MT 625 H or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Manitou MT 625 H easily from our partners

Spare parts

Do your lookup for high quality parts for Manitou MT 625 H online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Manitou MT 625 H now!

Transport

Telehandlers Transport & Shipping Services

In case you want a transport for your machine, apply our services. Query the most appropriate transport quotes for Telehandlers built on transport dimensions and weight. Our partners provide comprehensive services to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News