GTH-2506 Genie Telehandler Specs & Dimensions (2003 - 2020)

Name: Genie GTH-2506 Telehandlers
Brand: Genie

The Genie GTH-2506 is a telehandler manufactured by Genie from 2003 to 2020. It has a weight of 4.58 tons and a transport length o…

The Genie GTH-2506 is a telehandler manufactured by Genie from 2003 to 2020. It has a weight of 4.58 tons and a transport length of 3.84 meters. The maximum horizontal reach is 3.35 meters, and it can lift loads up to 2.5 tons at the nominal load center of gravity. The lifting height is 5.79 meters, and it has a capacity of 0.9 tons at full forward reach. The center of gravity is located at 600 millimeters. It has a travel speed of 23 km/h and a capacity of 2 tons at full lift height. The transport width is 1.81 meters, and the transport height is 1.92 meters.

GTH-2506

Years of manufacture: 2003—2020

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - GTH-2506 Genie

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 2.5 t

Centre of gravity: 600 mm

Standard tyres: 12-16.5 PR10 8

Transmission type: HY

Max. Reach horizontal: 3.35 m

Capacity at full forward reach: 0.9 t

Lifting height: 5.79 m

Capacity at full lift height: 2 t

Weight: 4.58 t

Transport length: 3.84 m

Transport width: 1.81 m

Transport height: 1.92 m

Travel speed: 23 km/h

Engine manuf.: Deutz

Engine type: TD2.9 L4

Engine power: 56 kW

Emission level: Tier 3 b

More technical details, like: model series, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, attachment quickhitch, telematics available, engine manufacturer, engine model, aspiration, rated speed, engine output - gross, torque, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, boom angle - maximum, lift height - maximum, reach - maximum, reach - at maximum lift height, reach - ground with maximum capacity, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, speed - reverse maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: No
Side displacement: No

Download datasheets (PDF)

Buy & Rent

Used Genie Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Genie GTH-2506 with similar Telehandlers

Genie GTH-2506

Nominal load at COG:: 2.5 t

Centre of gravity:: 600 mm

Standard tyres:: 12-16.5 PR10 8

Transmission type:: HY

Manitou BT 420

Nominal load at COG:: 2 t

Centre of gravity:: 500 mm

Standard tyres:: 265/70 R 19/28

Transmission type:: HY

Bobcat T 2556

Nominal load at COG:: 2.5 t

Centre of gravity:: 500 mm

Standard tyres:: 400/70x20

Transmission type:: HY

New Holland LM 410

Nominal load at COG:: 2.8 t

Centre of gravity:: 500 mm

Standard tyres:: 17.5 LR 24

Transmission type:: W

JCB 520-55

Nominal load at COG:: 2 t

Centre of gravity:: 500 mm

Standard tyres:: 12.5/80-18

Transmission type:: W

Do you want to see more detailed comparison?

Show me!

Sell Genie GTH-2506

Telehandlers appraisal with LECTURA Valuation

Whether you need to get value of your Genie GTH-2506 or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Genie GTH-2506 easily from our partners

Do your lookup for high quality parts for Genie GTH-2506 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Genie GTH-2506 now!

Transport

Telehandlers Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Check the ideal transport quotes for Telehandlers built on dimensions and weight. Our partners provide major services to meet your demands.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 12.06.2026