Ausa CH 200
2t
Lx2/L2
500 mm
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 2 t |
---|---|
Standard tyres | Lx2/L2 |
Centre of gravity | 500 mm |
Transmission type | HY |
Weight | 3.8 t |
Engine manuf. | Isuzu |
Engine type | 4 LE 2 |
Engine power | 38.6 kW |
Total width | ### |
Construction height | ### |
Lifting height | ### |
Travel speed with / without load | ### |
Hoisting with / without load | ### |
Lowering with load | ### |
max. climbing ability | ### |
Engine power | ### |
Dimension lxwxh | ### |
Displacement | ### |
Revolutions at max torque | ### |
Max. torque | ### |
No. of cylinders | ### |
Cylinder bore x stroke | ### |
Weight | ### |
Emission level | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
Successful RAVAS scale forks
Fit iForks for your Ausa CH 200 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Check out 4 Ausa products here
Hiab, part of Cargotec, will supply 37 HIAB loader cranes equipped with connected service HiConnect™ to ADIF (Administrador de Infraestructuras Ferroviarias),...