Roto 40.18 EVS Merlo Rotating Telehandler Specs & Dimensions (1998 - 2002)

The Roto 40.18 EVS telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine h…

The Roto 40.18 EVS telehandler model is manufactured by Merlo. Find and download detailed specs and data sheets for this machine here.

This telehandler is built to provide up to 95kW or 127 horse power, delivered from its powerful Deutz engine to the 14.3t Roto 40.18 EVS machine. The Roto 40.18 EVS is categorised in the biggest machine segment in the telehandlers category. The size of standard tyres for this Merlo Roto 40.18 EVS is 18-22.5. Max. Horizontal reach of this Roto 40.18 EVS model from Merlo is 15m. 4t is its maximum nominal load capacity with a 500mm center of gravity. This telehandler from Merlo is able to work with 3t capacity at up to 17.8m height. At full forward reach, this model can control a weight of 0.6t.

It has been sold without Inclination correction, StVZO Equipment and Diesel particulate filter as of 2002. Find detailed specifications and machine details in the original Merlo Roto 40.18 EVS datasheet.

The newest version of this Roto 40.18 EVS model is priced at between €153,000 and €195,000, with the production of this model stopped in 2002. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.

Based on other telehandlers specifications and pricing variations, the Merlo Roto 40.18 EVS can be considered similar to the Caterpillar TH414C and Caterpillar TH417C. The most commonly viewed Merlo models of this type on LECTURA Specs are the TF 50.8 T-120, TF 33.7-115 and TF 50.8 T-CS-156-CVTRONIC, and 56 other telehandlers, which currently range from 2.7t up to 12t are also available. Want more detailed specifications? Download the latest Merlo Roto 40.18 EVS specs data sheet on LECTURA Specs today!

Rotating telehandlers Merlo Roto 40.18 EVS

Technical specs - Roto 40.18 EVS Merlo

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Centre of gravity
500 mm
Standard tyres
18-22.5
Transmission type
Hy
Max. Reach horizontal
15 m
Capacity at full forward reach
0.6 t
Lifting height
17.8 m
Capacity at full lift height
3 t
Weight
14.3 t
Model series
Roto
Engine manuf.
Deutz
Engine type
6 Zyl. Turbo
Engine power
95 kW

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level...

More technical details, like: transport length, transport width, transport height, travel speed, max. climbing ability, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine output - net, steering type, service brake - type, service brake - location, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, width - stabiliser spread, lift height - maximum, lift height - with maximum capacity, reach - maximum, reach - ground with maximum capacity, carriage rotation angle, stabilised lift height - with maximum capacity, turning radius - over tyres, turning radius - over forks, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, stabilised lift capacity - to max height, stabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, speed - forward maximum, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter
No
limited pivotable
No
endless rotation
No

Download datasheets (PDF)

Buy & Rent

Used Merlo Rotating telehandlers for sale

LECTURA obtains current deals from many sources about Rotating telehandlers.
Find best offers on often visited classified marketplaces presenting second hand Rotating telehandlers to buy in many countries.

Get in touch for more details:

Compare Merlo Roto 40.18 EVS with similar Rotating telehandlers

Merlo Roto 40.18 EVS

Merlo Roto 40.18 EVS

Nominal load at COG:
4 t
Centre of gravity:
500 mm
Standard tyres:
18-22.5
Transmission type:
Hy
MAGNI RTH 4.18 Smart

MAGNI RTH 4.18 Smart

Nominal load at COG:
4 t
Centre of gravity:
500 mm
Standard tyres:
18 R19.5 (445/65 R19.)
Transmission type:
HY
Bobcat TD 40150

Bobcat TD 40150

Nominal load at COG:
4 t
Centre of gravity:
500 mm
Standard tyres:
18x22.5
Transmission type:
HY

Do you want to see more detailed comparison?

Show me!

Spare parts & Components

Get spare parts for Merlo Roto 40.18 EVS easily from our partners

Spare parts

Do your lookup for high quality parts for Merlo Roto 40.18 EVS online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Rotating telehandlers spare parts easily today - worldwide.

Get parts for Merlo Roto 40.18 EVS now!

Transport

Rotating telehandlers Transport & Shipping Services

In case you look for a transport your machine, apply our services. Query the most appropriate transport quotes for Rotating telehandlers based on transport dimensions and weight. Our partners provide comprehensive services to satisfy your needs.

Ask for transport price

Data provided by Lectura logo

News