T 20 Tecna electric forklift specs & dimensions (2000 - 2013)

Nominal load at COG: 2t – Standard tyres: SE 2x/2 – Total width: 1130mm – Construction height: 2176mm – Centre of gravity: 500mm –…

Nominal load at COG: 2t – Standard tyres: SE 2x/2 – Total width: 1130mm – Construction height: 2176mm – Centre of gravity: 500mm – Voltage: 80V

Tecna is the manufacturer of the T 20 electric forklift. The production years for this model are (2000 - 2013). Find here detailed specs for T 20 electric powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Tecna.

Technical specs - T 20 Tecna

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
2 t
Standard tyres
SE 2x/2
Total width
1130 mm
Construction height
2176 mm
Centre of gravity
500 mm
Voltage
80 V
Traction motor
10 kW
Hoist motor
12 kW
Weight
3.595 t
Battery weight
1.21 t
Turning radius
1.76 m
Lifting height
3.32 m
Travel speed with / without load
15.5/17 km/h
Hoisting with / without load
0.46/0.66 m/s
Lowering with load
0.5 m/s
Model series
T

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

Download datasheets (PDF)

Tecna T 20 overview

Drive

Transmission

The front two drive motors are carried out by means of independent and separate transmissions with gears constantly connected with inside a bath of oil. The steady conjunctions with easy access are perfectly protected in its position, by the chassis.


Brakes

The front axle brakes are multi-disc system in constant bath of oil, actuated by a pedal of automotive type heaving long life without maintenance. Electronic braking with energy recovery. Hand brake for parking. Proportional electronic brake.


Battery

The serial battery Tecna perfectly fits its place, fixed in operating position by means of a well designed access, which secures protection from the truck roof to the driver. For that reason its extraction and placement back is realized in very short time.


Handling

Upright

Upright Duplex, Duplex FL and Triplex FL., one perfect GRAN VISION (new generation). Integral side shifter as Standard.


Safety

Steering Axle

The steering axle gives a turning radius of 180°, identical to the three wheeler one, but with the stability and safety of one 4 wheels.


Hydraulic System

The big reservoir for hydraulic oil is integrated to the frame structure, due to which the liquid refrigeration is aided to a great extent from this configuration. The sections for oil conduction are short, without curves, and no prerequisites for energy loss from rubbing or friction heating are generated. It incorporates safety valves in elevation and descent and auxiliary valves for overpressure. In the lifting unit, there is an anti-cavity system. In the retard circuit, a filter of 25 microns is incorporated. The main hydraulic valve may incorporate one 4th function and auxiliary electrovalves.


Frame

The frame designed by means of a computer using the system for finite methods forms a very stable and robust set, integrating also the motors and the steering axle. Its low profile provides an optimal center of gravity of the forklift, which, besides its good appearance, secures a high safety rate of these machines.


Cabin & Equipment

Ergonomics

Operator compartment with the same dimensions as those of a greater tonnage. Manipulation is done by means of a joystick (option – levers). The seat offers great comfort with a safety belt, weight adjustment, and height and leaning-back positioning. An armrest is included, and there is an LCD display that provides constant control of the machine functions. The OHG height is 2.065 mm for T16/18, 2.90 mm for T20, and 2.215 mm for T20H, adjustable for tall stature.


Buy & Rent

Used Tecna Electric forklifts for sale

LECTURA analyzes current offers from many sources about Electric forklifts.
Find the selection of the best offers on often visited marketplaces presenting second hand Electric forklifts for sale in many countries.

Get in touch for more details:

Compare Tecna T 20 with similar Electric forklifts

Tecna T 20

Tecna T 20

Nominal load at COG:
2 t
Standard tyres:
SE 2x/2
Total width:
1130 mm
Construction height:
2176 mm
Tecna T 16

Tecna T 16

Nominal load at COG:
1.6 t
Standard tyres:
SE 2x/2
Total width:
1040 mm
Construction height:
2176 mm

Spare parts & Components

Get spare parts for Tecna T 20 easily from our partners

Spare parts

Do your lookup for high quality parts for Tecna T 20 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Electric forklifts spare parts easily today - worldwide.

Transport

Electric forklifts Transport & Shipping Services

In case you want a transport for your machine, utilise our services. Examine the ideal transport quotes for Electric forklifts created on transport dimensions and machine weight. Our partners provide extensive options to meet your requirements.

Data provided by Lectura logo

News

Material Handling News by LECTURA 08.06.2026

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.