SCF 6060 2.0 Crown electric forklift specs & dimensions (2015 - 2022)

e-GEN™ Braking System

Variable regenerative motor braking is optimised and assisted with electronic friction brakes, eliminating maintenance associated with typical wet, disk or drum style brakes. The appropriate amount of stopping force is applied to match operator brake input and the current operating conditions of the truck. The closed loop Access 1 2 3 traction control will automatically keep the truck on hold until a travel input is requested, even when operating on a ramp. Automatic electric parking brakes activate when the operator leaves the seat, a travel input has not been requested or battery power has been disconnected.

Four Wheel Truck

The rugged axle frame, forged spindle and connecting links eliminate the need for adjustment. A two-piece spindle and kingpin with tapered roller bearings improves life and serviceability. Spherical bearing with struts pins in the connecting links eliminate any play in the linkage. All bearing locations are sealed to exclude contaminants and are equipped with lubrication fittings for ease of service. The steering geometry is matched to the controller to deliver smooth steering at all angles. The advantage is less tyre scrubbing which extends tyre life. Both motors receive power, even in the tightest turns. This helps the truck to accelerate, turn and manoeuvre even from a full turn start position. Cornering speed control regulates the drive motor’s output by the turning degree of the truck. The advantage is smooth, stable steering which may increase operator confidence and productivity.

Crown Drive System

Crown has applied the latest generation AC drive system, enhanced with Access 1 2 3 technology. The demand for high efficiency systems that closely match customer torque requirements is met with this latest generation control system. Crown-manufactured, independently controlled, AC drive motors are specifically designed to optimise system integration between the traction and braking controls. Crown’s Access 1 2 3 technology provides optimum performance and control by offering a communication interface for operators and technicians, intelligent coordination of lift truck system and simplified service with advanced diagnostics. The Crown display is used for easy troubleshooting, access service history and set performance features. Three modes of performance can be selected to accommodate operator experience or application requirements.

Hydraulics

Low noise hydraulic pump serves both lift and steer systems. The hydraulic system provides continuous filtration through suction filter and easy to service return filter. Hydraulic actuation is precise and oil is controlled using metered spool valves. 3 spool valve for lift/lower, tilt and an auxiliary function is standard and features an integrated pressure relief valve for system protection. A pressure compensation lowering valve ensures safe controlled lowering speeds.

Cabin Features

Partial Cab: Front screen with tempered glass, wiper and washer; top screen with laminated safety glass; cabin height as on standard overhead guard height; rear screen with tempered glass, defrost with 15-minute auto off timer, wiper and washer, gas spring assist 2-stage tilting window. Soft Cab: Full cabin with soft doors, PVC zipper type roll-up doors with large windows. Full Cab: Cabin with hard doors featuring automotive-class comfort, removable hard doors with gas spring and door locks, two-way sliding windows on both sides, and side windows with tempered glass. Heater for full cabins: Lower right side mounted cabin heater with temperature control and 2-speed fan, along with five adjustable outlets: foot, operator, and defrost.