D 19 WIDE 4x2 R 430 E6 Renault (2020 - 2026) lorry truck specs & dimensions

Cab

Day cab All steel Cab, electro-zinc plated and cataphoretic paint treatment. Cab paint colour: White ekla technical code: 09350 Red badge Anti-spray deflectors Four point mechanical cab suspension. Hydraulic cab tilt. 2 heated, remote control rear view mirrors. Rear view mirrors for bodywork up to 2.55 m wide Fold-back front view mirror Air horn Roof-level air intake. Air filter clogging indicator Spray suppression on front wings Tinted, laminated windscreen. Without rear window.

Cab interior

Upper storage cupboard with net cover, 2 storage compartments (50 l) with net covers Three sun blinds on windscreen DTCO 4.0 digital chronotachograph Air-suspended driver's seat with fitted seat belt. Driver's armrest Red seat belts Adjustable passenger seat Blower socket on central console Raised engine tunnel. Cab lighting time-delay. 2 Coat hooks on rear panel Electrically operated door windows Air conditioning Handbook and Service pack in French.

Minimum Front Axle Load

To maintain the driving comfort (lightness of steering, braking) of vehicles in all load and driving conditions once the vehicle is bodied, the following minimum front axle load(s) must be respected: 3500 kg. The weight of the vehicle is an average indicative weight of its STANDARD build, filled with urea, oil, windscreen wash liquid and coolant at 100%, fuel level at 90% and with driver (75kg).

Electrical equipment

Battery capacity: 170 Ah Batteries with level check Battery isolation switch Alternator : 110 amp capacity. Rear signalling lighting.

Rear drive axle

P13170-E single reduction final drive axle without differential lock. Rear loading capacity (technical max.): 13 t. Drive axle ratio: 2.85.

Chassis

Chassis protective paintwork, mineral grey colour technical code: 03650. Standard rear overhang, pre-drilled for bodybuilder. Removable front towing cap, front under-run protection, and rear under-run bar. Trailer cross member for G150 hook (100 x 160 mm attachment). Wings fitted in standard position, with a side exhaust.

Bodywork

Body mounting brackets front and rear provide bodybuilder access through the bulkhead. Orange LED side marker lights with reflector and provision for bodybuilder electronic box interface.