D 19 WIDE 4x2 R 250 E6 Renault (2020 - 2026) lorry truck specs & dimensions

Cab exterior

Day cab All steel Cab, electro-zinc plated and cataphoretic paint treatment. Cab paint colour: White ekla technical code: 09350 Red badge.

Cab interior

Upper storage cupboard with net cover, 2 storage compartments (50 l) with net covers. Three sun blinds on windscreen. DTCO 4.0 digital chronotachograph. Air-suspended driver's seat with fitted seat belt. Driver's armrest. Red seat belts. Adjustable passenger seat. Blower socket on central console. Normal engine tunnel. Cab lighting time-delay. 2 Coat hooks on rear panel. Electrically operated door windows. Air conditioning. Handbook and Service pack in French.

Instrument panel

Central tablet support with 2 USB-C ports and a 12V socket on the dashboard for accessories. The starting inhibitor is controlled by a transponder key, and it features a folding key. Additionally, there is a remote control for central door locking, and the speed limiter is adjustable via steering wheel control (ASL).

Minimum Front Axle Load

To maintain the driving comfort (lightness of steering, braking) of vehicles in all load and driving conditions once the vehicle is bodied, the following minimum front axle load(s) must be respected: 3500 kg. The weight of the vehicle is an average indicative weight of its STANDARD build, filled with urea, oil, windscreen wash liquid and coolant at 100%, fuel level at 90% and with driver (75kg).

Electrical Equipment

Battery capacity: 170 Ah Batteries with level check Battery isolation switch Alternator: 110 amp capacity. Rear signalling lighting.

Rear drive axle

P13170-E single reduction final drive axle without differential lock. Rear loading capacity (technical max.): 13 t. Drive axle ratio: 3.36. P1391 drive axle with double hub reduction, P13170 single reduction final drive axle, and P1361 drive axle with double hub reduction. Other drive axle ratios are available, including an integral differential lock.

Chassis

Chassis protective paintwork in mineral grey colour (technical code: 03650). It features a standard rear overhang, pre-drilled for bodybuilder, a removable front towing cap, front under-run protection, rear under-run bar, and a closing cross member with pre-drilling for towing yoke. Wings are fitted in standard position, and there is a side exhaust.

Bodywork

Body mounting brackets are provided at the front and rear, allowing bodybuilder access through the bulkhead. Additionally, there are orange LED side marker lights with reflectors and a provision for a bodybuilder electronic box interface.