Manufactured by Merlo, this is the P 23.6 EV telehandler. Find and download detailed specs and data sheets for this machine here. ... Read more
Manufactured by Merlo, this is the P 23.6 EV telehandler. Find and download detailed specs and data sheets for this machine here.
The Merlo P 23.6 EV is a 4.35t machine with Deutz engine which powers this model with up to 42kW or 56 horse power. The Merlo P 23.6 EV can be grouped in the smallest machine segment in the telehandlers category. Standard tyres for this Merlo P 23.6 EV telehandler have a size of 12.0/75x18. The model's features include a max. Horizontal reach of 3,1m With a center of gravity of 500mm, this model can lift a nominal load of 2.3t. The Merlo P 23.6 EV can lift 1.5t at a full lift height of 5.8m. The capacity of this model at full forward reach is 0.8t.
It has been sold without Side displacement, StVZO Equipment and Diesel particulate filter as of 1999. Find detailed specifications and machine details in the original Merlo P 23.6 EV datasheet. Specification sheet is available for a free download in German - providing the machine descriptions and more detailed specs about this particular model.
This model can be acquired for a list price between €47,000 and €59,000. Production of the P 23.6 EV stopped in 1999. For more detailed information about pricing and current residual values, check out the LECTURA Valuation system.
The P 23.6 EV Merlo can be compared to several models from other manufacturers. The closest telehandlers based on specification and pricing are the Dieci ET 22, Bobcat T 2556 and Sanderson T2-6-22. At present, 56 other telehandlers, which range from 2.7t up to 12t are produced by Merlo. Of these, TF 50.8 T-CS-156-CVTRONIC, TF 50.8 T-120 and also TF 33.7-115 are the most frequently visited on LECTURA Specs. Want more detailed specifications? Download the latest Merlo P 23.6 EV specs data sheet on LECTURA Specs today!
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
More technical details, like: model series, transport length, transport width, transport height, travel speed , max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load...
Show moreAll specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel
Check out the ERA equipment CO2 Calculator to find out the CO2 emissions per hour of use of the Merlo P 23.6 EV or alternative Telehandlers.
The carbon footprint evaluation can be carried out for various biofuel scenarios or other variables.
or visit the ERA Equipment CO2 Calculator to find out how to reduce your carbon footprint.
LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.
Find out if rental works for you:
Ownership cost (annual): 16730.79 EUR
Rental cost (annual): 15521.03 EUR
You can save 8 % by renting a telehandlers
*Presented prices are sample calculations.
Merlo P 23.6 EV
Nominal load at COG: 2.3 t
Standard tyres: 12.0/75x18
Centre of gravity: 500 mm
Transmission type: Hy
Nominal load at COG: 2 t
Standard tyres: 265/70 R 19/28
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2.5 t
Standard tyres: 400/70x20
Centre of gravity: 500 mm
Transmission type: HY
Nominal load at COG: 2 t
Standard tyres: 12.5/80-18
Centre of gravity: 500 mm
Transmission type: W
Nominal load at COG: 2.5 t
Standard tyres: 12x18
Centre of gravity: 500 mm
Transmission type: HY
Inquire the spare part you need from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an operator, LECTURA can advise you to the right direction. Order the Telehandlers spare parts easily today - worldwide.
.jpg)
Kalmar, part of Cargotec, is celebrating a significant milestone with the completion of the 6,000th machine, a reachstacker, at its manufacturing plant in Shanghai, China.
What do you think about this machine?
Check out 2 Merlo products here
.jpg)
.jpg)
.png)
.jpg)
