Merlo P 20.6 SC telehandler specs & dimensions (1992 - 1995)

Technical specs - P 20.6 SC Merlo

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 2 t

Model series: P

Centre of gravity: 500 mm

Standard tyres: 11.5/80-15

Lifting height: 6 m

Engine manuf.: Perkins

Engine type: 504.2 T

Engine power: 38 kW

More technical details, like: transmission type, max. reach horizontal, capacity at full forward reach, capacity at full lift height, weight, transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage...

More technical details, like: transmission type, max. reach horizontal, capacity at full forward reach, capacity at full lift height, weight, transport length, transport width, transport height, travel speed, max. climbing ability, drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, cab position, chassis type, levelling - chassis, stabilisers, drive - 2w / 4w, transmission type, engine manufacturer, engine model, aspiration, rated speed, tyre - front size, tyre - rear size, tyre 2 - front size option, tyre 2 - rear size option, service brake - type, length - front of carriage, height - over cab, width - operating, wheelbase, ground clearance, width - cab, lift height - maximum, reach - maximum, reach - at maximum lift height, unstabilised lift height - with maximum capacity, turning radius - over tyres, breakout force, lift capacity - maximum, lift capacity - to max height, lift capacity - to max reach, unstabilised lift capacity - maximum, unstabilised lift capacity - to max height, unstabilised lift capacity - to max reach, fuel tank, number of boom sections, load centre, lift capacity - fork maximum, raise time - boom, extend time - boom, operating weight are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: No
Side displacement: No

Download datasheets (PDF)

P 20.6 SC Merlo Specification for Europe (DE)

What Merlo says about this machine

What are the key characteristics of this model?

The P 20.6 SC is Merlo's first compact telehandler. It lifts 2 t and reaches a lifting height of 6 m. It weighs 4 t with forks. He drives max. 20 km / h. Its width is 1.8 m. Its overall height is 2.14 m.

What type of job is the machine best suited to do?

The first 20.6 were built around 3 decades ago. There are still a few lovingly cared for individual items. They are simple to set up and use. They do their work wherever a small telescopic loader with a 6 m arm is needed.

Can you name features that differentiates this machine from others?

The machine has a 4-cylinder engine that delivers 2,600 rpm and 52 hp. It has a hydrostatic drive, a two-part telescopic arm and a pump with variable delivery capacity.

What type of companies is this machine designed for?

The easy-to-use and clear machine can be used well in confined spaces. With good care and maintenance, it is a favorite of telescopic loader fans.

Buy & Rent

Used Merlo Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Merlo P 20.6 SC with similar Telehandlers

Merlo P 20.6 SC

Nominal load at COG:: 2 t

Model series:: P

Centre of gravity:: 500 mm

Standard tyres:: 11.5/80-15

Manitou BT 420

Nominal load at COG:: 2 t

Model series:: BT

Centre of gravity:: 500 mm

Standard tyres:: 265/70 R 19/28

JCB 520-55

Nominal load at COG:: 2 t

Model series:: 520

Centre of gravity:: 500 mm

Standard tyres:: 12.5/80-18

Sauerburger FXScopic 5620

Nominal load at COG:: 2 t

Model series:: FX

Standard tyres:: 15.0/55-17 AS

Genie Telelift 2306

Nominal load at COG:: 2.3 t

Centre of gravity:: 500 mm

Do you want to see more detailed comparison?

Show me!

Spare parts & Components

Get spare parts for Merlo P 20.6 SC easily from our partners

Do your lookup for high quality parts for Merlo P 20.6 SC online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Merlo P 20.6 SC now!

Transport

Telehandlers Transport & Shipping Services

In case you want a transport for your machine, take advantage of our services. Search for favourable transport quotes for Telehandlers created on dimensions and weight. Our partners provide major options to fit your requirements.

Ask for transport price

Data provided by

News

Material Handling News by LECTURA 09.06.2026

LECTURA and Rental-Portal Announce Strategic Partnership to Simplify Equipment Rental

LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.

P 20.6 SC Merlo Telehandler Specs & Dimensions (1992 - 1995)