Icarus 50.18 GD Dieci Telehandler Specs & Dimensions (2020 - 2022)

Name: Dieci Icarus 50.18 GD Telehandlers
Brand: Dieci

The Dieci Icarus 50.18 GD is a telehandler manufactured from 2020 to 2022. It has a weight of 14.8 tons and a transport length of …

The Dieci Icarus 50.18 GD is a telehandler manufactured from 2020 to 2022. It has a weight of 14.8 tons and a transport length of 6.9 meters. With a maximum horizontal reach of 13.8 meters, it can handle a nominal load of 5 tons at the center of gravity. The lifting height of this telehandler is 17.8 meters, and it has a capacity of 1 ton at full forward reach. The center of gravity is positioned at 500 millimeters. It can travel at a speed of 27 km/h and has a maximum climbing ability of 40 percent. The capacity at full lift height is 2.3 tons. The transport width is 2.44 meters, and the transport height is 2.65 meters.

Icarus 50.18 GD

Years of manufacture: 2020—2022

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - Icarus 50.18 GD Dieci

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG: 5 t

Model series: Icarus

Centre of gravity: 500 mm

Standard tyres: 440/80x24

Transmission type: HY

Max. Reach horizontal: 13.8 m

Capacity at full forward reach: 1 t

Lifting height: 17.8 m

Capacity at full lift height: 2.3 t

Weight: 14.8 t

Transport length: 6.9 m

Transport width: 2.44 m

Transport height: 2.65 m

Travel speed: 27 km/h

max. climbing ability: 40 %

Engine manuf.: Kubota

Engine type: V3800

Engine power: 85.1 kW

Displacement: 3.769 l

Revolutions at max torque: 1500 rpm

Max. torque: 379 Nm

No. of cylinders: 4

Emission level: IV/Tier 4 f

More technical details, like: drive system, voltage, traction motor, hoist motor, travel speed with / without load, hoisting with / without load, lowering with load, dimension lxwxh, cylinder bore x stroke are available in the full technical specs.

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

Special equipment

Diesel particulate filter: No
StVZO Equipment: No
Inclination correction: No
Side displacement: No

Download datasheets (PDF)

Dieci Icarus 50.18 GD overview

Drive

Facilitated driving and maintenance

Four driving wheels and four steering wheels Three steering modes which can be selected by the operator: concentric, front and crab Hydraulic oil change every 2000 hours Easy to reach filters in the engine compartment Sturdy and durable boom assembly by tested reliability for years of multiple applications and uses Standard battery isolation switch, well protected and quickly accessible from the engine compartment.

Safety

Strong and safe

Extremely rugged vehicles with exceptional loading capacities in all operating conditions, with boom retracted or extended. High efficiency Kubota engines: low noise, low consumption and low emissions. Arm too high function: forward movement speed limited automatically when the boom is raised. Increased lateral stability: longer wheelbase and robust chassis. Rear stabilizer cylinder: rear axle locked when the boom is at maximum height. EN15000 anti-tipping system: aggregating movements blocked in the event of overload and load level always in evidence. ROPS and FOPS Cab: operator protection guaranteed thanks to the dimensional stability of the cab. Independent outriggers with proportional controls. Transversal leveling device: to always work with the chassis in horizontal position, even on uneven ground.

Pre-arrangement for man basket

The remote control allows the operator to operate the boom and the aerial platform directly from the basket, in total autonomy and full safety (complies with the EN 280 standard).

Equipment

Intelligent commands

All boom movements are controlled by a single joystick, in a precise and proportional way and regardless of the load Dashboard with clear instrument panel and well-distributed controls Automatic electric parking brake, even with the engine off, hill-start assist always available Joystick with integrated FNR, with capacitive sensor to automatically detect the operator's presence Vehicle information and diagnostic menu browsable in the 3.5” display.

Buy & Rent

Used Dieci Telehandlers for sale

LECTURA analyzes fresh deals from many sources about Telehandlers.
Compare first rate deals on liked classified portals presenting used Telehandlers to buy in many countries.

Get in touch for more details:

Go to the offers

Compare Dieci Icarus 50.18 GD with similar Telehandlers

Dieci Icarus 50.18 GD

Nominal load at COG:: 5 t

Model series:: Icarus

Centre of gravity:: 500 mm

Standard tyres:: 440/80x24

Sennebogen 305 XL

Nominal load at COG:: 4.5 t

Model series:: XL

Centre of gravity:: 600 mm

Standard tyres:: 405/70 R10

Caterpillar TH 82

Nominal load at COG:: 4 t

Model series:: TH

Centre of gravity:: 500 mm

Standard tyres:: 15.5-25

Haulotte HTL4014

Nominal load at COG:: 4 t

Model series:: HTL

Centre of gravity:: 500 mm

Standard tyres:: 400/80-24

Skyjack SJ1056 TH

Nominal load at COG:: 4.535 t

Model series:: SJ

Centre of gravity:: 500 mm

Standard tyres:: 14x24 16 PR

Sell Dieci Icarus 50.18 GD

Telehandlers appraisal with LECTURA Valuation

Whether you need to know value of your Dieci Icarus 50.18 GD or valuation of your Telehandlers fleet, LECTURA Valuation will help. Simply fill the form and see the values for Telehandlers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Dieci Icarus 50.18 GD easily from our partners

Do your lookup for high quality parts for Dieci Icarus 50.18 GD online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Telehandlers spare parts easily today - worldwide.

Get parts for Dieci Icarus 50.18 GD now!

Transport

Telehandlers Transport & Shipping Services

In case you want to transport your machine, take advantage of our services. Query the best fitting transport quotes for Telehandlers built on dimensions and weight. Our partners offer major services to satisfy your demands.

Ask for transport price