Yale GP190DC
8.618t
4x/2
12.762 t
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 8.618 t |
---|---|
Standard tyres | 4x/2 |
Weight | 12.762 t |
Lifting height | 3.75 m |
Travel speed with / without load | 30/31 km/h |
Hoisting with / without load | 0,45/0,45 m/s |
Lowering with load | 0,50/0,48 m/s |
max. climbing ability | 33 % |
Engine manuf. | Cummins |
Engine type | QSB 4.5 |
Engine power | 119 kW |
Engine power | 160 HP |
Displacement | 4.5 l |
Revolutions at max torque | 1500 rpm |
Max. torque | 624 Nm |
No. of cylinders | 4 |
Emission level | Stage IV |
Centre of gravity | ### |
Transmission type | ### |
Total width | ### |
Construction height | ### |
Dimension lxwxh | ### |
Cylinder bore x stroke | ### |
Weight | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
Successful RAVAS scale forks
Fit iForks for your Yale GP190DC and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Check out 18 Yale products here
DP World Antwerp Gateway has ordered a fleet of 34 Automated Stacking Cranes (Konecranes Gottwald ARMGs) for its container terminal in Antwerp, Belgium.