MSW025-F Yale Walkie Stacker Specs & Dimensions (2019 - 2026)

Outriggers, Wheels and Tires

Outriggers on the MSW025-F are field adjustable to 32", 42" and 49" (45", 50" and 57" OD). The standard factory setting is 42" ID. On the MSW030, the outriggers are integral with the fork legs. The standard load wheel configuration for all models is a single load wheel with two roller bearings. A "knock-out" axle provides for quick and easy maintenance. The load wheel compound is 92 durometer polyurethane, and the wheel measures 4" X 2.8". A 9" X 4" press-on poly drive tire is standard, and the drive wheel is secured to the axle with 5 bolts.

Mast, Carriage and Forks

Yale products provide outstanding visibility and are available with multiple mast type configurations in various heights. The mast is constructed of widespread outer channels and nested inner sections.

Mast Channels

Mast channels are specially rolled fine-grain steel. Wrap around cross-members and cross-ties provide added support and mount mast channels. Roller pressures are minimized through use of widely spaced sheaves and rollers. Side-thrust adjustment is accomplished without special tools or mast disassembly. Triple mast yokes incorporate hoist cylinders mounted in-line with the mast channels, improving operator visibility. Hoist cylinder rods are hard-chrome plated for durability. Cylinders are mounted on floating mounts that help prevent cylinder wear. Lowering speeds are controlled by a valve in the manifold block. Controlled descent is assured by flow control valves in lift cylinder bases. Hook-type carriage with class II forks is standard. Forks are heat treated, forged steel with increased thickness in critical heel section.

Controls

Travel Direction and Speed are selected by rotating the actuator in the desired direction of travel. The butterfly throttle control provides infinite grip positions minimizing operator fatigue. The stationary portion of the handle minimizes wrist movement and provides a solid grip while maneuvering the truck. This assures additional stability while driving the truck. The bottom-mounted tiller handle optimizes the operating position.

Traction System

The traction system consists of the traction motor, gearbox, and brake. The enclosed traction motor is shielded from contamination and UL approved with premium brushes. The traction system has a proven gear design with cast iron helical gears and bearings and heat treated gears in an oil bath. The highly reliable mechanically applied brake is mounted to the traction motor. The brake is controlled by a solid-state handle position switch which prevents the truck from moving when the tiller handle is fully raised or fully lowered.

Options

Cold storage/freezer package to 0°F. Fixed width outrigger with options (MSW030 only). Proportional lift/lower controls. Sideshifter (2" each side of center). Various mast heights. Lexan mast shield.

MSW025-F Battery Pack and Charger

An optional battery pack, consisting of four 6-volt, deep-cycle flooded cell batteries and a self contained 25 Amp charger with battery cover is available. Batteries are accessed for maintenance through a flip-top cover and removable side panels. The charger operates from a 110 volt outlet and includes a detachable AC power cord with on-board storage capability. The battery capacity is 145 Ah at a 6 hour (185 Ah at a 20 hour) rate. To charge the batteries, simply attach the power cord to the charger and plug it into the outlet. The charger remains connected to the truck while the batteries are being charged. The charger automatically prevents the truck from being driven. Once the power cord is disconnected from the outlet, the truck is again operational.

MSW025-030F “Pallet Pro” Battery

The MSW025-030F is configured to accept an optional 5-7 plate 24V maintenance free battery pack with on-board charger. A 9” battery compartment is required.

Additional Features

Lubrication – Fill and drain plugs are provided for drive unit. Battery connector – Standard is red 175 amp connector. Standard equipment includes key switch and an electronic horn. 48" Load backrest is standard. 6" Free-lift standard on all SIMPLEX masts. Multi-function display with BDI, hour meter and fault light.