WI 2300-1.6 TL Crown Walkie Stacker Specs & Dimensions (2010 - 2012)

Control Handle

The robust X10™ control handle is designed to allow for optimum turning radius with low steering effort. Nearly all control buttons can be operated with either hand and can be accessed with minimum hand and wrist movement. The operator’s hands are protected within the handle yoke. The horn switches are integrated in the hand grips. An ergonomic forward and reverse thumb wheel allows for precise manoeuvring.

Brake Override Function

For easy operation in tight areas a brake override function is incorporated which allows the WI 2300 to be driven safely and precisely at creep speed with the handle in a near vertical position. The control handle remains within the profile of the power unit at all times, even when performing 90° turn. When the forward/reverse thumb wheel is in neutral position the parking brake is immediately activated thus preventing unexpected movement.

Steering

The centre mounted X10™ handle allows for an optimum turning radius and enables the operator to drive and manoeuvre in very congested areas. Steering effort applied at the handle by the operator is transmitted to the drive unit via a double universal shaft and a maintenance free self-adjusting steering chain.

Mast

High visibility two and three stage mast design features nested I-beams and angled rollers. Lift cylinders are positioned in outer I-beam profile for best visibility through mast and clear view on fork tips during load handling. Standard equipment includes full free lift for two and three stage mast. Mast cushioning between stages ensures smooth operation. Heavy-duty mast carriage and chain rollers are sealed and lubricated for life. The WI model features fixed formed steel forks welded to a high visibility backrest. This design accommodates Euro pallets or other containers without bottom boards.

Performance and Diagnostic

Various detected faults can be recognized through a status flash code signalled by an LED. The status code will be stored in the controller memory. The integrated storage register for fault history can be interrogated by service personnel. With the hand held unit in test mode, a functional test of components is also possible. All changeable parameters can be programmed by the hand held unit.

Frame

Easy serviceability of all components in the power unit and simple adjustment to compensate for tyre wear is possible. The single swing-out door design allows easy access to all components. Contoured panels around the power unit and mast give maximum protection to the operator and internal components.

Battery

Hinged battery top cover allows easy access to the battery. The battery compartment offers space for batteries up to 375 Amp. hours.