At bauma 2022, SENNEBOGEN will bring the largest material handler ever exhibited at a bauma to its booth: the 885 G-Series. The handling giant for the port impresses with an operating weight of more than 300 t and a reach of up to 38 m.
Toyota 8 FGCU 20 LPG forklift specs (2010 - 2013)
Toyota is the manufacturer of the 8 FGCU 20 LPG forklift. The production years for this model are (2010 - 2013). Find here detaile... Read more
Toyota is the manufacturer of the 8 FGCU 20 LPG forklift. The production years for this model are (2010 - 2013). Find here detailed specs for 8 FGCU 20 LPG powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Toyota.
Technical specs - 8 FGCU 20 Toyota
Specification
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.
- Nominal load at COG 2 t
- Standard tyres VR 21x7x15 HR 16x5x10-1/2
- Centre of gravity 500 mm
- Transmission type HY
- Weight 3.24 t
- Turning radius 1.92 m
- Lifting height 5.04 m
- Travel speed with / without load 17/17 km/h
- Hoisting with / without load 0.63/0.645 m/s
- Lowering with load 0.5/0.5 m/s
- max. climbing ability 36/21 %
- Engine manuf. Toyota
- Engine type 4 Y-ECS
- Engine power 38 kW
-
Total width
### -
Construction height
### -
Dimension lxwxh
### -
Displacement
### -
Revolutions at max torque
### -
Max. torque
### -
No. of cylinders
### -
Cylinder bore x stroke
### -
Emission level
###
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
Carbon footprint calculation
Calculate the carbon footprint of the Toyota 8 FGCU 20 per hour of use:
Or go directly to ERA Equipment CO2 Calculator
service provided by
Download datasheets (PDF)
Buy & Rent
Compare Toyota 8 FGCU 20 with similar LPG Forklifts
Toyota 8 FGCU 20
Nominal load at COG: 2 t
Standard tyres: VR 21x7x15 HR 16x5x10-1/2
Centre of gravity: 500 mm
Transmission type: HY
Komatsu FG 20 T-8
Nominal load at COG: 2 t
Standard tyres: L 4
Centre of gravity: 500 mm
Transmission type: HY
Still RC 40-16 T
Nominal load at COG: 1.6 t
Standard tyres: SE 2x/2
Centre of gravity: 500 mm
Transmission type: W
Jungheinrich TFG 16
Nominal load at COG: 1.6 t
Standard tyres: SE 4
Centre of gravity: 500 mm
Transmission type: W
MaxGermany MG-C 20 HG
Nominal load at COG: 2 t
Centre of gravity: 500 mm
Transmission type: HY
Spare parts & Components
Get spare parts for Toyota 8 FGCU 20 easily from our partners
Inquire the spare part you look for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an operator, LECTURA can point you to the right direction. Order the LPG Forklifts spare parts easily today - worldwide.
Events & News
Material Handling News by LECTURA 11.08.2022
.jpg)
Large-scale machine highlight at bauma 2022: SENNEBOGEN presents 300 t material handler
X
What do you think about this machine?
Toyota products
Check out 14 Toyota products here