SC 5320-1.3 Crown electric forklift specs & dimensions (2012 - 2016)

e-GEN™ Braking System

Variable regenerative motor braking is optimised and assisted with electric friction brakes, eliminating maintenance associated with typical wet, disc or drum style brakes. The appropriate amount of stopping force is applied to match operator brake input and the current operating conditions of the truck. The closed loop Access 1 2 3 traction control will automatically keep the truck on hold until a travel input is requested, even when operating on a ramp. Automatic electric parking brakes activate when the operator leaves the seat, a travel input has not been requested or battery power has been disconnected.

Proportional Rack and Pinion Steering System

On-demand power steering is served by the main hydraulic pump when steering is requested. The hydrostatic power steering uses a large, totally enclosed rack and pinion gear assembly. The steering geometry is matched to the controller to deliver smooth steering at all angles. The advantage is less tyre scrubbing which extends tyre life. Both motors receive power, even in the tightest turns. This helps the truck to accelerate, turn and manoeuvre even from a full turn start position.

Carriage

An FEM / ISO / ITA Class II carriage is standard. Fork spread is adjustable between 314 – 914 mm. An optional hook-on type ISO sideshifter or other attachments are easy to add. Forged high strength steel forks with fork tip indicators are available in various lengths.

Crown Drive System

Crown has applied the latest generation AC drive system enhanced with Access 1 2 3 technology. The system provides high efficiency systems that closely match customer torque requirements to meet with this latest generation control system. Crown-manufactured, independently controlled, AC drive motors are specifically designed to optimise system integration between the traction and braking controls. Crown’s Access 1 2 3 technology provides optimum performance and control by offering a communication interface for operators and technicians, intelligent coordination of lift truck system and simplified service with advanced diagnostics. The Crown display is used for easy troubleshooting, access service history and set performance features. Three modes of performance can be selected to accommodate operator experience or application requirements.

Drive Units

Two independent drive units are manufactured by Crown. The heavy duty drive unit gears are constantly lubricated in an oil bath. This time proven design is quiet and reliable, providing years of trouble-free service.

Driveability

The SC 5300 Series incorporates numerous design features to improve operator comfort and productivity. A large step positioned at a low height of only 375mm greatly improves entry/exit on both sides of the truck. A low battery cover helps the operator glide into the truck’s full suspension seat. The overhead guard is shaped to open up the entry/exit window on either side. The narrow, offset tilt steer column and steer wheel further facilitate entry/exit. Floorboards are large, unobstructed and rubber covered to insulate the operator from vibration.