GTP30MX Yale diesel forklift specs & dimensions (2022 - 2026)

The Yale GTP30MX is a diesel forklift manufactured since 2022. It has a weight of 4.2 tons and a nominal load capacity of 3 tons a…

The Yale GTP30MX is a diesel forklift manufactured since 2022. It has a weight of 4.2 tons and a nominal load capacity of 3 tons at the center of gravity. The forklift can lift loads up to a height of 3 meters, with a center of gravity at 500mm. It has a maximum climbing ability of 24 percent. The hoisting speed is 0m/s with or without a load, while the lowering speed with a load is 0.52m/s. The forklift has a total width of 1235mm and can travel at a speed of 19km/h with or without a load. It has a turning radius of 2.365 meters and a construction height of 2060mm.

Diesel Forklifts Yale GTP30MX

Visit Yale live at

Technical specs - GTP30MX Yale

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
3 t
Centre of gravity
500 mm
Standard tyres
28x9-15-12PR(7.00-12-12PR)/6.50-10-10PR
Weight
4.2 t
Total width
1235 mm
Construction height
2060 mm
Turning radius
2.37 m
Lifting height
3 m
Travel speed with / without load
19/20 km/h
Hoisting with / without load
0.515/0.575 m/s
Lowering with load
0.52 m/s
max. climbing ability
24 %
Model series
GTP
Engine manuf.
GCT
Engine type
K25
Engine power
34 kW
Displacement
2.49 l
Revolutions at max torque
1600 rpm
Max. torque
186 Nm
No. of cylinders
4

More technical details, like: transmission type, dimension lxwxh, cylinder bore x stroke, emission level are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download datasheets (PDF)

Yale GTP30MX overview

Drive

Standard

Simplex mast Operator presence Hydraulic Interlock Traction Interlock Cowl mounted levers Trunnion mount mast Full halogen light kit including turn indicators Head light guards Rotating LED beacon Swing down LPG bracket Small diameter steering wheel Rubber floor mat Entry assist grip Electric directional shift lever Neutral start Reverse alarm Separate inch/brake podal Comprehensive dash display Single element air cleaner Rubber mount rear axle Wide mast with wide field vision


Handling

Options

Engine options – LPG, Diesel, Dual Fuel Mast options simplex mast – 3000mm to 5000mm lift duplex mast – 3300mm to 4100mm lift triplex mast – 4000mm to 6000mm lift Integral side shift carriage Fork lengths – 920mm to 2120mm Tyre options – pneumatic, solid, non-marking Control valve options Front screens Rain covers Cabs Pre-cleaner for air filter LED lighting Speed meter Load weight meter Special paint Reverse assist grip with horn button Yale Vision Telemetry


Performance

Continuous Stability Enhancement (CSE)

The maintenance free CSE enhances lateral stability without compromising uneven surface travel, through reducing truck lean by limiting the articulation of the steer axle.


Events

Visit Yale live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Buy & Rent

Used Yale Diesel Forklifts for sale

LECTURA gathers most relevant deals from many sources about Diesel Forklifts.
Find current offers on often visited classified marketplaces presenting second hand Diesel Forklifts to buy in many countries.

Get in touch for more details:

Used Yale Diesel Forklifts for sale | Forklift-International
Go to the offers

Compare Yale GTP30MX with similar Diesel Forklifts

Yale GTP30MX

Yale GTP30MX

Nominal load at COG:
3 t
Centre of gravity:
500 mm
Standard tyres:
28x9-15-12PR(7.00-12-12PR)/6.50-10-10PR
Weight:
4.2 t
Nexen FDX 25

Nexen FDX 25

Nominal load at COG:
2.5 t
Centre of gravity:
500 mm
Standard tyres:
L
Weight:
4.073 t
Dalian CPCD 30 AA

Dalian CPCD 30 AA

Nominal load at COG:
3 t
Centre of gravity:
500 mm
Standard tyres:
L 2x/2
Weight:
4.32 t
Artison EFD 25 ECO-Z

Artison EFD 25 ECO-Z

Nominal load at COG:
2.5 t
Centre of gravity:
500 mm
Standard tyres:
L
Weight:
3.948 t
Clark C 500 60 D

Clark C 500 60 D

Nominal load at COG:
3 t
Centre of gravity:
500 mm
Standard tyres:
V4

Sell Yale GTP30MX

Diesel Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Yale GTP30MX or valuation of your Diesel Forklifts fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Diesel Forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Yale GTP30MX easily from our partners

Spare parts

Do your lookup for high quality parts for Yale GTP30MX online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Diesel Forklifts spare parts easily today - worldwide.

Get parts for Yale GTP30MX now!

Transport

Diesel Forklifts Transport & Shipping Services

In case you look for a transport your machine, apply our services. Look for the most appropriate transport quotes for Diesel Forklifts built on transport dimensions and weight. Our partners provide comprehensive options to satisfy your demands.

Ask for transport price

Data provided by Lectura logo

News