8FD40U Toyota diesel forklift specs & dimensions (2019 - 2026)

The Toyota 8FD40U is a diesel forklift manufactured since 2019. It has a weight of 6.15 tons and a nominal load capacity of 4 tons…

The Toyota 8FD40U is a diesel forklift manufactured since 2019. It has a weight of 6.15 tons and a nominal load capacity of 4 tons at the center of gravity. The forklift can lift loads up to a height of 3.05 meters. It has a hoisting speed of 0 meters per second with or without a load, and a lowering speed of 0 meters per second with a load. The total width of the forklift is 1350 millimeters. It can travel at a speed of 21 kilometers per hour with or without a load. The turning radius of the forklift is 2.66 meters. The construction height of the forklift is 2110 millimeters.

Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U
Diesel Forklifts Toyota 8FD40U

Technical specs - 8FD40U Toyota

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4 t
Standard tyres
2x/2 pneumatic
Weight
6.15 t
Total width
1350 mm
Construction height
2110 mm
Turning radius
2.66 m
Lifting height
3.05 m
Travel speed with / without load
21/23 km/h
Hoisting with / without load
0.525/0.55 m/s
Lowering with load
0.53/0.48 m/s
Model series
FD
Engine manuf.
Toyota
Engine type
1KD
Engine power
55 kW
Displacement
2.982 l
Revolutions at max torque
1500 rpm
Max. torque
300 Nm
No. of cylinders
4
Emission level
Tier 4f

More technical details, like: centre of gravity, transmission type, max. climbing ability, dimension lxwxh, cylinder bore x stroke are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download datasheets (PDF)

Toyota 8FD40U overview

Drive

Standard Features

Durability Control Area Network (CAN-bus) communication Fully stamped steel side panels Full-floating front axle Moisture-resistant electric connectors Limited free-lift 2-stage mast (V) High cooling capacity radiator Tilt cylinder boots Low-maintenance battery Large-capacity engine-cooling fan 8" cyclone air cleaner Plate-iron front fenders Anti-restart ignition key switch Stamped steel engine hood Radiator screen External hydraulic oil cooler


Serviceability

Easy-access no tools required floorboard Engine hood assist damper with lock device Engine protection system Air cleaner discharge valve Easy-lift engine hood with wide 75° opening Easy access to common service items such as filters & dipsticks


Safety

Support System Features

Support System of Active Stability (SAS) includes several features: Operator Presence Sensing System (OPSS) Bolt-on overhead guard Key lowering interlock Electric horn Neutral start safety switch Asbestos-free components Orange forks LED headlights Key off/headlight off system Speed control


Buy & Rent

Used Toyota Diesel Forklifts for sale

LECTURA gathers most relevant deals from many sources about Diesel Forklifts.
Find current offers on often visited classified marketplaces presenting second hand Diesel Forklifts to buy in many countries.

Get in touch for more details:

Compare Toyota 8FD40U with similar Diesel Forklifts

Toyota 8FD40U

Toyota 8FD40U

Nominal load at COG:
4 t
Standard tyres:
2x/2 pneumatic
Weight:
6.15 t
Total width:
1350 mm
DanTruck 8435

DanTruck 8435

Nominal load at COG:
3.5 t
Standard tyres:
SE2/SE2
Weight:
5.9 t

Sell Toyota 8FD40U

Diesel Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Toyota 8FD40U or valuation of your Diesel Forklifts fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Diesel Forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Toyota 8FD40U easily from our partners

Spare parts

Do your lookup for high quality parts for Toyota 8FD40U online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Diesel Forklifts spare parts easily today - worldwide.

Get parts for Toyota 8FD40U now!

Transport

Diesel Forklifts Transport & Shipping Services

In case you look into transport options for your machine, apply our services. Query the ideal transport quotes for Diesel Forklifts created on transport dimensions and weights. Our partners provide large-scale services to meet your requirements.

Ask for transport price

Data provided by Lectura logo

News

Material Handling News by LECTURA 04.08.2026

More industry news