All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Diesel Forklifts Diesel Forklifts TCM TCM FD20-E2 specifications

    TCM FD20-E2 Specifications & Technical Data (2021-2021)

    Rate this machine now!

    Nominal load at COG: 3.5t – Centre of gravity: 500mm – Total width: 1150mm – Construction height: 2145mm – Turning radius: 2.2m – Engine manuf.: N/A

    Technical specs - FD20-E2 TCM


    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 3.5 t
    • Centre of gravity 500 mm
    • Total width 1150 mm
    • Construction height 2145 mm
    • Turning radius 2.2 m
    • Engine manuf. N/A
    • Engine type N/A
    • Engine power 36 kW
    • Engine power 48.3 HP
    • Emission level Euro V
    • Standard tyres ###
    • Transmission type ###
    • Weight ###
    • Lifting height ###
    • Travel speed with / without load ###
    • Hoisting with / without load ###
    • Lowering with load ###
    • max. climbing ability ###
    • Dimension lxwxh ###
    • Displacement ###
    • Revolutions at max torque ###
    • Max. torque ###
    • No. of cylinders ###
    • Cylinder bore x stroke ###
    • Weight ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    Buy & Rent

    Compare TCM FD20-E2 with similar Diesel Forklifts

    Press 1 image

    TCM FD20-E2

    Nominal load at COG: 3.5 t

    Centre of gravity: 500 mm

    Total width: 1150 mm

    Construction height: 2145 mm

    Press 1 image
    Clark C 500-y-60 D

    Nominal load at COG: 3 t

    Centre of gravity: 500 mm

    Press 1 image
    Toyota 02-5 FD 33

    Nominal load at COG: 3.5 t

    Centre of gravity: 500 mm

    Press 1 image
    Belet DV 30 BVA

    Nominal load at COG: 3 t

    Centre of gravity: 500 mm

    Press 1 image
    OM XD 30

    Nominal load at COG: 3 t

    Centre of gravity: 500 mm

    Total width: 1305 mm

    Construction height: 2175 mm

    Spare parts & Components

    Get spare parts for TCM FD20-E2 easily from our partners

    Inquire the spare part you search for from our partners with a few easy steps and select the best offer. Wether you are a dealer or end user, LECTURA can point you to the right direction. Order the Diesel Forklifts spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your TCM FD20-E2

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your TCM FD20-E2 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News


    What do you think about this machine?

    TCM products

    Check out 14 TCM products here

    More about TCM