Still RC 40-15
1.5t
SE
500 mm
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 1.5 t |
---|---|
Standard tyres | SE |
Centre of gravity | 500 mm |
Weight | 2.701 t |
Total width | 1120 mm |
Construction height | 2210 mm |
Turning radius | 1.895 m |
Lifting height | 3.33 m |
Travel speed with / without load | 20.5/21 km/h |
Hoisting with / without load | 0.65/0.69 m/s |
Lowering with load | 0.5/0.42 m/s |
max. climbing ability | 27 % |
Engine manuf. | Yanmar |
Engine type | 4TNE92 |
Engine power | 34 kW |
Transmission type | ### |
Engine power | ### |
Dimension lxwxh | ### |
Displacement | ### |
Revolutions at max torque | ### |
Max. torque | ### |
No. of cylinders | ### |
Cylinder bore x stroke | ### |
Weight | ### |
Emission level | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
Successful RAVAS scale forks
Fit iForks for your Still RC 40-15 and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Good machine with smooth operation
Still RC 40-15 user from United Arab EmiratesCheck out 15 Still products here
Ab sofort werden alle deutschen Jungheinrich-Standorte, darunter auch die sechs deutschen Werke des Unternehmens,...