Lectura specs Forklifts Diesel Forklifts Diesel Forklifts Sany Sany SCP160G specifications

Technical specs - SCP160G Sany

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG 16 t
Standard tyres 12.00x24 28 PR
Centre of gravity 1200 mm
Transmission type W
Weight 25.5 t
Total width 2675 mm
Construction height 3760 mm
Turning radius 5.1 m
Lifting height 4 m
Travel speed with / without load 28/30 km/h
Hoisting with / without load 0.35/0.4 m/s
Lowering with load 0.4 m/s
max. climbing ability 33/42 %
Engine manuf. Volvo
Engine type TAD572VE
Engine power 160 kW
Engine power 217 HP
Displacement 5.13 l
Revolutions at max torque 2300 rpm
Max. torque 910/1450 Nm
Emission level IV
Dimension lxwxh ###
No. of cylinders ###
Cylinder bore x stroke ###
Weight ###

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download data sheets - Sany SCP160G


What do you think about this machine?

Compare Sany SCP160G with other models

Press 1 image

Sany SCP160G


12.00x24 28 PR

1200 mm

Sany products

Check out 17 Sany products here

More about Sany