Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Diesel Forklifts Diesel Forklifts M&H M&H CPCD 35 specifications

    M&H CPCD 35 Specifications & Technical Data (2004-2007)

    Rate this machine now!

    Nominal load at COG: 3.5t – Standard tyres: 2x/2 – Centre of gravity: 500mm – Weight: 4.75t – Engine manuf.: Isuzu – Engine type: 4 JG 2

    Technical specs - CPCD 35 M&H

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    • Nominal load at COG 3.5 t
    • Standard tyres 2x/2
    • Centre of gravity 500 mm
    • Weight 4.75 t
    • Engine manuf. Isuzu
    • Engine type 4 JG 2
    • Engine power 44.8 kW
    • Transmission type ###
    • Total width ###
    • Construction height ###
    • Turning radius ###
    • Lifting height ###
    • Travel speed with / without load ###
    • Hoisting with / without load ###
    • Lowering with load ###
    • max. climbing ability ###
    • Engine power ###
    • Dimension lxwxh ###
    • Displacement ###
    • Revolutions at max torque ###
    • Max. torque ###
    • No. of cylinders ###
    • Cylinder bore x stroke ###
    • Weight ###
    • Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    Buy & Rent

    Compare M&H CPCD 35 with similar Diesel Forklifts

    No image available

    M&H CPCD 35

    Nominal load at COG: 3.5 t

    Standard tyres: 2x/2

    Centre of gravity: 500 mm

    Weight: 4.75 t

    Press 1 image
    Clark C 500-y-60 D

    Nominal load at COG: 3 t

    Standard tyres: L 4

    Centre of gravity: 500 mm

    Press 1 image
    Toyota 02-5 FD 33

    Nominal load at COG: 3.5 t

    Standard tyres: L 4

    Centre of gravity: 500 mm

    Weight: 5.39 t

    Press 1 image
    Belet DV 30 BVA

    Nominal load at COG: 3 t

    Standard tyres: L4

    Centre of gravity: 500 mm

    Weight: 4.5 t

    Press 1 image
    OM XD 30

    Nominal load at COG: 3 t

    Standard tyres: SE 4

    Centre of gravity: 500 mm

    Weight: 3.98 t

    Sell M&H CPCD 35

    Diesel Forklifts appraisal with LECTURA Valuation

    Wether you need to get price of your M&H CPCD 35 or appraisal of your Diesel Forklifts fleet, LECTURA Valuation will help. Simply fill the equipment details and see the price for Diesel Forklifts in few clicks.

    Valuate right now!
    Data provided by

    Spare parts & Components

    Get spare parts for M&H CPCD 35 easily from our partners

    Inquire the spare part you look for from our partners with a few easy steps and select the best offer. Wether you are a dealer or an operator, LECTURA can advise you to the right direction. Order the Diesel Forklifts spare parts easily today - worldwide.

    RAVAS iForks-32 weight scaling solution for your M&H CPCD 35

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your M&H CPCD 35 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Events & News

    Material Handling News by LECTURA 27.07.2021

    Weekly overview 19.7.-23.7. 2021
    Weekly overview 19.7.-23.7. 2021

    Weekly overview of interesting news from heavy machinery industry.

    More industry news Listen to podcast
    X

    What do you think about this machine?

    M&H products

    Check out 3 M&H products here

    More about M&H