All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Diesel Forklifts Diesel Forklifts Doosan Doosan D130S-5 specifications

    Doosan D130S-5 Specifications & Technical Data (2007-2017)

    Rate this machine now!

    Nominal load at COG: 13t – Standard tyres: L6(4x) – Centre of gravity: 600mm – Transmission type: W – Weight: 16.8t – Total width: 2350mm

    Technical specs - D130S-5 Doosan

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 13 t
    Standard tyres L6(4x)
    Centre of gravity 600 mm
    Transmission type W
    Weight 16.8 t
    Total width 2350 mm
    Construction height 2970 mm
    Turning radius 4.04 m
    Lifting height 3 m
    Travel speed with / without load 33/36 km/h
    Hoisting with / without load 0.43/0.49 m/s
    Lowering with load 0.48/0.43 m/s
    max. climbing ability 29.5 %
    Engine manuf. Doosan
    Engine type DL 06
    Engine power 103 kW
    Engine power ###
    Dimension lxwxh ###
    Displacement ###
    Revolutions at max torque ###
    Max. torque ###
    No. of cylinders ###
    Cylinder bore x stroke ###
    Weight ###
    Emission level ###

    L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

    RAVAS iForks-32 weight scaling solution for your Doosan D130S-5

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Doosan D130S-5 and realise immediate cost savings


    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system


    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    What do you think about this machine?

    Compare Doosan D130S-5 with other models

    Press 1 image

    Doosan D130S-5



    600 mm

    Doosan products

    Check out 25 Doosan products here

    More about Doosan