DP50CN3 Caterpillar diesel forklift specs & dimensions (2021 - 2026)

The Caterpillar DP50CN3 is a diesel forklift manufactured since 2021. It has a weight of 6.85 tons and a nominal load capacity of …

The Caterpillar DP50CN3 is a diesel forklift manufactured since 2021. It has a weight of 6.85 tons and a nominal load capacity of 5 tons at the center of gravity. The forklift can lift loads up to a height of 3.3 meters, with a center of gravity at 500mm. It has a maximum climbing ability of 25.4 percent. The hoisting speed with or without load is 0.54 meters per second, while the lowering speed with load is 0.5 meters per second. The forklift has a total width of 1460mm and can travel at a speed of 21 km/h with or without load. It has a turning radius of 2.76 meters and a construction height of 2295mm.

Diesel Forklifts Caterpillar DP50CN3

Technical specs - DP50CN3 Caterpillar

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
5 t
Centre of gravity
500 mm
Standard tyres
Front: 300-15-18PR / Rear: 7.00-12-14PR
Weight
6.85 t
Total width
1460 mm
Construction height
2295 mm
Turning radius
2.76 m
Lifting height
3.3 m
Travel speed with / without load
21/22 km/h
Hoisting with / without load
0.54/0.58 m/s
Lowering with load
0.5 m/s
max. climbing ability
25.4 %
Model series
DP
Engine manuf.
N/A
Engine type
DO4EG-T
Engine power
54 kW
Displacement
3.3 l
Revolutions at max torque
1800 rpm
Max. torque
260 Nm
No. of cylinders
4

More technical details, like: transmission type, dimension lxwxh, cylinder bore x stroke, emission level are available in the full technical specs.

L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)

Download specalog and datasheets (PDF)

Caterpillar DP50CN3 overview

Caterpillar DP50CN3 features overview

Capabilities and Options

The capabilities of the range are further boosted by a wide array of options that enable you to fine-tune each truck to your work requirements.


Drive

Safety and Ergonomics

PDS+ Presence Detection System disengages drive and hydraulic functions when the operator’s seat is vacated.Ground speed control feature limits truck’s top speed.Electronic button-operated parking brake is convenient and safe.Ergonomically shaped Grammer seat with back cushion is designed for optimal lateral support and driver comfort.Hydraulically controlled drum brake system gives increased safety.Adjustable steering column enables comfortable operation.


Performance

Unmatched Productivity

Engine hour meter keeps track of hours worked, helping fleet managers to schedule regular maintenance.Compact truck design increases manoeuvrability in areas with restricted space.Cooling system designed to reduce blockages utilising pusher type radiator airflow.Wide variety of mast types and lifting heights allows the truck to be specified to your needs.Full floating powertrain, with two forward speeds and one reverse speed, delivers high gradeability and fast travel.Hydrostatic steering system makes manoeuvring the truck light and easy.Optional factory-fitted panel cabin keeps the elements out, without compromising visibility, combining form and function in a design which keeps the truck performing in the most extreme of temperatures and in wet environments.


Buy & Rent

Used Caterpillar Diesel Forklifts for sale

LECTURA gathers most relevant deals from many sources about Diesel Forklifts.
Find current offers on often visited classified marketplaces presenting second hand Diesel Forklifts to buy in many countries.

Get in touch for more details:

Used Caterpillar Diesel Forklifts for sale | Forklift-International
Go to the offers

Compare Caterpillar DP50CN3 with similar Diesel Forklifts

Caterpillar DP50CN3

Caterpillar DP50CN3

Nominal load at COG:
5 t
Centre of gravity:
500 mm
Standard tyres:
Front: 300-15-18PR / Rear: 7.00-12-14PR
Weight:
6.85 t
OM DI 50 C 500

OM DI 50 C 500

Nominal load at COG:
5 t
Centre of gravity:
600 mm
Standard tyres:
L 4
Weight:
6.71 t
Nissan DF 05 A 50 U

Nissan DF 05 A 50 U

Nominal load at COG:
5 t
Centre of gravity:
600 mm
Standard tyres:
L 4
Weight:
7.565 t
Heli CPCD 60 W

Heli CPCD 60 W

Nominal load at COG:
6 t
Centre of gravity:
600 mm
Standard tyres:
SE 4x/2
Weight:
8.64 t
Raniero C 50 H 500

Raniero C 50 H 500

Nominal load at COG:
5 t
Centre of gravity:
500 mm
Standard tyres:
SE 2/2
Weight:
6.85 t

Sell Caterpillar DP50CN3

Diesel Forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to get value of your Caterpillar DP50CN3 or valuation of your Diesel Forklifts fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Diesel Forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Caterpillar DP50CN3 easily from our partners

Spare parts

Do your lookup for high quality parts for Caterpillar DP50CN3 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Diesel Forklifts spare parts easily today - worldwide.

Get parts for Caterpillar DP50CN3 now!

Transport

Diesel Forklifts Transport & Shipping Services

In case you want a transport for your machine, take advantage of our services. Look for the ideal transport quotes for Diesel Forklifts built on dimensions and weight. Our partners provide major options to meet your demands.

Ask for transport price

Data provided by Lectura logo

News

Material Handling News by LECTURA 19.06.2026

More industry news