Artison PFD 18 9L Plus
1.8t
L2x/2
500 mm
Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.
Nominal load at COG | 1.8 t |
---|---|
Standard tyres | L2x/2 |
Centre of gravity | 500 mm |
Transmission type | W |
Weight | 3.25 t |
Total width | 1065 mm |
Construction height | 2225 mm |
Turning radius | 2.23 m |
Lifting height | 4 m |
Travel speed with / without load | 17/18 km/h |
Hoisting with / without load | 0.603/0.625 m/s |
Lowering with load | 0.492/0.535 m/s |
max. climbing ability | 23/18 % |
Engine manuf. | Yanmar |
Engine type | 4TNE94 |
Engine power | 35 kW |
Displacement | 3.054 l |
Revolutions at max torque | 2450 rpm |
No. of cylinders | 4 |
Engine power | ### |
Dimension lxwxh | ### |
Max. torque | ### |
Cylinder bore x stroke | ### |
Weight | ### |
Emission level | ### |
L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulics with Simplex mast (3,3m up to 10t • 5m > 10t load capacity)
Successful RAVAS scale forks
Fit iForks for your Artison PFD 18 9L Plus and realise immediate cost savings
Functions:
Gross/net weighing
Totalling with sequence number
Weight data transfer to smart phone, tablet, handheld and WMS/ERP system
Benefits:
Installation within 5 minutes
Completely wireless with digital calibration
Check out 3 Artison products here
Weekly overview of interesting news from the heavy machinery industry.