ABG2820 Volvo ABG2820 Specifications & Technical Data (2008—2018)

Environmentally Friendly Engine with low Fuel Consumption

The COM III certified diesel engine runs quietly and is environmentally friendly. Low fuel consumption together with the large fuel tank capacity permit non-stop paving operations - depending on job-site conditions - of up to 12 hours without refuelling.

Excellent Operating Comfort

The operator’s platform offers excellent all-round vision. The control panel and seat can cross-slide as a complete unit to both sides of the paver and rotate through 30° in its end positions.

Superior View of Material Flow

The cross-sliding, rotating operator’s seat and panel unit and a high sitting position provide an excellent view of the flow of paving material.

Low Operating Costs

The ABG2820 is designed to require very low maintenance. Lifetime lubricated crawler tracks with an automatic tensioning system and maintenance-free bearings for the conveyor, the screed tamper, and vibrator reduce maintenance time and costs to a minimum.

Travel Drive with High Tractive Force

The electronically controlled travel drive ensures a powerful propulsion, accurate straight travel and exact pave speed control. The robust track assemblies and beam construction are prerequisites for a smooth and even mat. The high static friction of the replaceable thick rubber track pads ensures a very high tractive power.

Efficient Mix Conveyor System

The well dimensioned hopper has a capacity of 6 t and can be charged by large dump trucks without any problem. Due to individual hydrostatic drives for each conveyor and each auger the mix distribution is individually adapted to the requirements of each screed side.

Two Independent Conveyors (Option)

With the two independent conveyors the flow of material can be adapted to unequal requirements of each screed side (e.g. when paving along a wall).

Individually Operated Hopper Wings (Option)

Separately controlled hopper wings facilitate feeding from the side by wheel loaders etc. when paving close to an obstruction.

Front Hopper Wall (Option)

If the jobsite conditions don’t permit the material feed by rear dump trucks the hopper can also be charged from the side (by conveyor, wheel loader etc.). The front hopper wall helps spilling material in front of the paver.

Fields of Application

The ABG2820 is the economic solution when paving the following applications: Footpaths, cycle tracks and rural roads Parking lots and access roads Sports arenas and recreation grounds Landscaped projects Urban roads Resurfacing work.

Variomatic Screed VB 30

The VB 30 tamping and vibrating screed with patented extendable guide system infinitely extends to double the basic width (1.5 - 3.0 m). Screed extensions increase the paving width up to 4.0 m.