Bomag CR 662 RM Specifications & Technical Data (2021-2026)

Technical specs - CR 662 RM Bomag

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 16.42 t

Standard width: 3.15 m

Max. width: 9.1 m

Drive: DH

Bunker capacity: 7.56 m³

Operating speed: 68.6 m/min

Type of screed: V

Model series: CR

Engine manuf.: Cummins

Engine type: QSB6.7

Engine power: 194 kW

Displacement: 6.7 l

Emission level: Tier 4f

More technical details, like: transport length, transport width, transport height, hydr. extension from, hydr. extension up to, soil pressure, dimension lxwxh, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke are available in the full technical specs.

Basic model with operator cabin roof, std. beam and screed plate heating Prices and weights refer to the std. width (most demanded/sold width), excl. hydraulic or manual extention

Special equipment

Diesel particulate filter: No
Bilateral levelling automatic: No
Vibration: Yes
High compaction: Yes
Spray unit: No
Tamper: No

Download datasheets (PDF)

CR 662 RM Bomag Specification for North America (EN)

Bomag CR 662 RM FAQ

When was the Bomag CR 662 RM manufactured?

The Bomag CR 662 RM was first produced in 2021.

How much does the Bomag CR 662 RM weigh?

The Bomag CR 662 RM weighs 16.42 tons.

What is the operating speed of the Bomag CR 662 RM tracked asphalt paver?

The Bomag CR 662 RM has an operating speed of 68.6 meters per minute.

What type of drive system does the Bomag CR 662 RM have in its undercarriage?

The Bomag CR 662 RM has a diesel hydraulic drive system in its undercarriage.

What are the paving performance specifications of the Bomag CR 662 RM?

The Bomag CR 662 RM features a vibratory screed, a standard paving width of 3.15 meters, a maximum paving width of 9.1 meters, an operating speed of 68.6 meters per minute, and a bunker capacity of 7.56 cubic meters.

How much is a Bomag CR 662 RM Tracked Asphalt Paver (2021u20132025) worth?

The residual value of the Bomag CR 662 RM depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Bomag CR 662 RM overview

Bomag CR 662 RM features overview

Mtv option

The CR662RM with MTV offer unique features that make it the most effective material transfer vehicle on the market.

Crawler Units

Frame Raise System

The Cedarapids Frame Raise and Three-Point Suspension systems give you what you need to lay the smoothest mats. Simple rear frame height adjustment prevents damage to paver components. Easier loading and on-site maneuverability maintains uniform head of material. Frame Raise also offers easier paver loading and unloading, increases on-site maneuverability and greatly reduces the possibility of damage to critical paver components.

Three-Point Suspension System

Isolates frame movement for smoother mats. Maintains a uniform head of material. Provides superior traction. Enhances texture and smoothness results.

Track System

The Cedarapids Smartrac self-tensioning track system eliminates the need for manual track adjustments, extends track component life and significantly reduces detracking. The CR662RM paver features a replaceable 18 in (457 mm) wide rubber track, delivering superior ride characteristics. A wider track stance combined with an independent hydrostatic transmission drive that allows track counter-rotation delivers unsurpassed on-site maneuverability. Pivot-mounted, oscillating, rubber bonded bogie wheel assemblies offer more uniform load distribution, extended track component life and provide a smoother ride.

Pavers

Outboard Spreading Auger Drive

This feature minimizes center line segregation and temperature differential. Significant improvements in uniform density can be achieved across the full width of the mat. Typical top down cracking failures are also diminished.

Remix Anti-Segregation System

The BOMAG patented Remix Anti-Segregation System, which re-blends material into a more homogeneous mix, results in uniform temperatures across the entire mat width. The 16.7 ton (15 tonne) full-capacity receiving hopper quickly accepts material from trucks without having to limit the flow of material from the truck. The variable-pitch auger design results in a differential drawdown of material along the entire shaft length, uniformly pulling from all areas of the hopper. It aggressively re-blends 100% of the material being drawn from the hopper through inter-leafing augers, mixing in a “figure eight” motion. Material then passes through a transfer conveyor pickup auger mounted at 90º to the remix auger before entering the transfer slats. Augers are positioned at or below hopper wing level for excellent truck clearance.

Events

Visit Bomag live at

NordBau 2026

Holstenhallen Neumünster, Germany

September 9 — 13

Machine inspection

Ask for inspection of your Bomag CR 662 RM from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Bomag CR 662 RM with similar Tracked Asphalt Pavers

Bomag CR 662 RM

Weight:: 16.42 t

Standard width:: 3.15 m

Max. width:: 9.1 m

Drive:: DH

Ammann AFT 500 E/G

Weight:: 15 t

Standard width:: 2.55 m

Max. width:: 4.9 m

Sumitomo HA 60 C-7 CE

Weight:: 14.3 t

Standard width:: 2.3 m

Max. width:: 6 m

Drive:: DH

Bomag BM 1200/30

Weight:: 18.9 t

Marini MF 704

Weight:: 16.5 t

Standard width:: 2.5 m

Max. width:: 7.55 m

Drive:: DH

Sell Bomag CR 662 RM

Tracked Asphalt Pavers appraisal with LECTURA Valuation

Whether you need to calculate price of your Bomag CR 662 RM or valuation of your Tracked Asphalt Pavers fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Tracked Asphalt Pavers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Bomag CR 662 RM easily from our partners

Do your lookup for high quality parts for Bomag CR 662 RM online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Tracked Asphalt Pavers spare parts easily today - worldwide.

Get parts for Bomag CR 662 RM now!

Transport

Tracked Asphalt Pavers Transport & Shipping Services

In case you look for a transport your machine, utilise our services. Ask for the ideal transport quotes for Tracked Asphalt Pavers created on transport dimensions and machine weight. Our partners provide extensive options to meet your requirements.

Ask for transport price

Data provided by

News

Construction News by LECTURA 27.06.2026