BG 190 TA-5 EP HBM-NOBAS BG 190 TA-5 EP Specifications & Technical Data (2014—2019)

Optional Equipment

Integrated ROPS/FOPS cab mounted on isolators to limit vibration and noise entering the cab. Excellent all-round visibility. Roomy and comfortable. Adjustable steering pedestal with EURO control lever arrangement. Interior of cab fully lined, floor covering. Tinted safety glass windows, sliding doors left and right with lockable intermediate positions, fresh air heating with pre-filter, air circulation. Adjustable, mechanical spring mounted driver’s seat with safety belt. One inside mirror and two folding outside mirrors. Front window washer. Wipers front and rear. Blinds front and rear.

All Wheel Drive System

Hydrodynamic rear axle drive with 6-speed Ergopower transmission and torque converter as well as freely selectable microprocessor controlled hydrostatic front axle drive. Power train is controlled appropriate to tyre traction of front and rear wheels.

Circle Drive

Hydraulically driven worm gear transmission. Circle drive system fully protected against impact damage by an overload clutch. Rotation 360°.

Brakes

Service brake Dual-circuit, power-boosted, multi-disc oil-bath type, effective on four wheels. Includes reserve power and operator warning system Parking brake Independent electrically operated, acting on power shift. Hydraulic spring accumulated single disc type.

Load-Sensing Hydraulics

The control valves of the working hydraulics may be actuated at a time and independent of each other. The load-sensing pump (axial piston pump) discharges only the required quantity of oil if a control valve is actuated. When hydraulic power is not required, system pressure is only 24 bar, ensuring low oil temperature and fuel saving. Lock valves and brake valves prevent a cylinder drift under load.

Rear Axle

Oscillating tandem axle with axle insert. No-Spin differential. Multi-disc brakes in all four wheel hubs. Parking brake at powershift transmission.

Frame

Front and rear frame sections connected with an adjustment free articulated pin. Front: Fully welded box section Minimum dimensions of box section 300 x 310 mm Plate thickness 20 mm Rear: Fully welded section Dimensions (solid main bars) 270 x 90 mm Hydraulic articulated frame steering (left & right) 30°.

Light Equipment

2 head lights at the front, every 2 indicator lights (including hazard warning lights) at the front and rear, 2 rear lights, 2 brake lights, 1 backup light plus every 2 working lights at the top and bottom at the front of the cab, 2 working lights at the top at the rear of the cab, and 2 tail lights on the sides.

Steering

Hydraulic power steering. Minimum turning radius without dozer blade 7500 mm. Minimum turning radius with dozer blade 8050 mm. Steering angle 45°.

Circle (open version)

Hardened teeth, cut on inside of circle for maximum strength and minimum wear. The circle is held positively in place at four points by four clamps and guide shoes. The clamp and guide shoes are located where greatest loading occurs. Diameter 1510 mm Thickness 40 mm Height 110 mm Adjustable shoes and clamps 4.

Front Axle

2 types are available: Oscillation 15° up and down Steering angle 45° Wheel lean ±17° Ground clearance 591 mm Non driven with wheel lean (T version) Stable welded steel beam with wheel lean Driven with wheel lean (TA version) Stable welded steel beam with wheel lean and radial piston engines in wheel hubs, pulling power on surface conditions. Electronically adjustable (infinitely variable), with the possibility to fit in the hydraulic differential lock.