Komatsu D65EX-17 Specifications & Technical Data (2012-2016)

Technical specs - D65EX-17 Komatsu

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 22.62 t

Transport length: 5.79 m

Transport width: 3.545 m

Transport height: 3.15 m

Soil pressure: 0.65 kg/cm²

Track width: 560 mm

Travel speed: 12 km/h

Front blade width: 3.87 m

Model series: D

Engine manuf.: Komatsu

Engine type: SAA6D114E-5

Engine power: 162 kW

Displacement: 8.85 l

Revolutions at max torque: 1950 rpm

No. of cylinders: 6

Cylinder bore x stroke: 114x144.5 mm

Emission level: IV

More technical details, like: blade type, reverse travel speed, transmission type, max. drawbar pull, dimension lxwxh, max. torque, undercarriage type, undercarriage system, cab - type, rops, fops, telematics available...

More technical details, like: blade type, reverse travel speed, transmission type, max. drawbar pull, dimension lxwxh, max. torque, undercarriage type, undercarriage system, cab - type, rops, fops, telematics available, platform, grade control available, platform, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - net, engine output - gross, transmission type, speed mode - 1, carrier rollers, track rollers, raised sprocket, shoe - width, shoe - type, ground contact area, number of shoes, service brake type, height - max, height - top of rops, ground clearance, width - over tracks, track length - on ground, blade, blade - width, blade - height, blade - dig depth, blade - lift clearance, blade - tilt, steering - differential, steering - clutches and brakes, fuel tank, blade - capacity, speed - forward maximum, speed - reverse maximum, ground bearing pressure, drawbar pull - maximum, implement pump - flow, implement pump - pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and corresponding blade

Special equipment

Diesel particulate filter: No
Rear ripper: No
Tilt device: No
Aircondition: Yes

Download datasheets (PDF)

Komatsu D65EX-17 FAQ

When was the Komatsu D65EX-17 manufactured?

The Komatsu D65EX-17 was manufactured from 2012 to 2016.

How much does the Komatsu D65EX-17 weigh?

The Komatsu D65EX-17 weighs 22.62 tons.

What are the transport dimensions of the Komatsu D65EX-17 bulldozer?

The Komatsu D65EX-17 has a transport length of 5.79 meters, a transport width of 3.55 meters, and a transport height of 3.15 meters.

What is the travel speed of the Komatsu D65EX-17 bulldozer?

The Komatsu D65EX-17 bulldozer has a travel speed of 12 km/h.

What are the undercarriage specifications of the Komatsu D65EX-17 bulldozer?

The Komatsu D65EX-17 bulldozer has a track width of 560 mm and a soil pressure of 0.65 kg/cmu00b2.

What is the width of the front blade on the Komatsu D65EX-17 bulldozer?

The front blade of the Komatsu D65EX-17 bulldozer is 3.87 meters wide.

How much is a Komatsu D65EX-17 Bulldozer (2012u20132016) worth?

The residual value of the Komatsu D65EX-17 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Events

Visit Komatsu live at

SteinExpo 2026

Homberg/Nieder-Ofleiden, Germany

September 2 — 5

NordBau 2026

Holstenhallen Neumünster, Germany

September 9 — 13

Machine inspection

Ask for inspection of your Komatsu D65EX-17 from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Komatsu D65EX-17 with similar Bulldozers

Komatsu D65EX-17

Weight:: 22.62 t

Transport length:: 5.79 m

Transport width:: 3.545 m

Transport height:: 3.15 m

Bell 850J

Weight:: 20.8 t

Transport length:: 5.377 m

Transport width:: 2.4 m

Transport height:: 3.18 m

Foton Lovol FSD7

Weight:: 23.8 t

Transport length:: 5.677 m

Transport width:: 3.5 m

Transport height:: 3.402 m

XGMA XG4161T

Weight:: 20.1 t

Transport length:: 6.447 m

Transport width:: 3.416 m

Transport height:: 3.06 m

Shanghai Pengpu PD165YS

Weight:: 18.2 t

Transport length:: 5.085 m

Transport width:: 3.416 m

Transport height:: 3.254 m

Do you want to see more detailed comparison?

Show me!

Sell Komatsu D65EX-17

Bulldozers appraisal with LECTURA Valuation

Whether you need to get value of your Komatsu D65EX-17 or valuation of your Bulldozers fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Bulldozers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Komatsu D65EX-17 easily from our partners

Do your lookup for high quality parts for Komatsu D65EX-17 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Bulldozers spare parts easily today - worldwide.

Get parts for Komatsu D65EX-17 now!

Transport

Bulldozers Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Check the ideal transport quotes for Bulldozers built on dimensions and weight. Our partners provide major services to meet your demands.

Ask for transport price

Data provided by

News

Construction News by LECTURA 17.06.2026