1150 K XLT Case 1150 K XLT Specifications & Technical Data (2009—2014)

Weight: 12.64t – Transport length: 5.97m – Transport width: 3.05m – Transport height: 2.83m – Soil pressure: 39.7kg/cm² – Track width: 610mm

Bulldozers Case 1150 K XLT

Technical specs - 1150 K XLT Case

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
12.64 t
Transport length
5.97 m
Transport width
3.05 m
Transport height
2.83 m
Soil pressure
39.7 kg/cm²
Track width
610 mm
Travel speed
9.7 km/h
Front blade width
3.05 m
Model series
K
Engine manuf.
Case
Engine type
667TA-EDJ
Engine power
118 kW
Displacement
6.7 l
Revolutions at max torque
2200 rpm

More technical details, like: blade type, reverse travel speed, transmission type, max. drawbar pull, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, undercarriage type, telematics available, grade control available...

More technical details, like: blade type, reverse travel speed, transmission type, max. drawbar pull, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, undercarriage type, telematics available, grade control available, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - net, engine output - gross, rated speed - torque, torque, transmission type, carrier rollers, track rollers, raised sprocket, shoe - pitch, shoe - width, shoe - type, ground contact area, number of shoes, service brake type, height - max, height - top of rops, ground clearance, width - over tracks, track length - on ground, blade, blade - width, blade - height, blade - dig depth, blade - lift clearance, blade - tilt, steering - differential, steering - clutches and brakes, fuel tank, blade - capacity, speed - forward maximum, speed - reverse maximum, ground bearing pressure, drawbar pull - maximum, implement pump - flow, implement pump - pressure, operating weight are available in the full technical specs.

Basic model with ROPS cabin and corresponding blade

Special equipment

Diesel particulate filter
No
Rear ripper
Yes
Tilt device
Yes
Aircondition
Yes

Download datasheets (PDF)

Case 1150 K XLT FAQ

When was the Case 1150 K XLT manufactured?

The Case 1150 K XLT was manufactured from 2009 to 2014.

How much does the Case 1150 K XLT bulldozer weigh?

The Case 1150 K XLT bulldozer weighs 12.64 tons.

What are the transport dimensions of the Case 1150 K XLT bulldozer?

The Case 1150 K XLT has a transport length of 5.97 meters, a transport width of 3.05 meters, and a transport height of 2.83 meters.

What is the travel speed of the Case 1150 K XLT bulldozer?

The Case 1150 K XLT bulldozer has a travel speed of 9.7 km/h.

What are the undercarriage specifications of the Case 1150 K XLT bulldozer?

The Case 1150 K XLT bulldozer has a track width of 610 mm and a soil pressure of 39.7 kg/cmu00b2.

What is the width of the front blade on the Case 1150 K XLT bulldozer?

The front blade of the Case 1150 K XLT bulldozer is 3.05 meters wide.

How much is a Case 1150 K XLT Bulldozer (2009u20132014) worth?

The residual value of the Case 1150 K XLT depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Case 1150 K XLT from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Case 1150 K XLT with similar Bulldozers

Case 1150 K XLT

Case 1150 K XLT

Weight:
12.64 t
Transport length:
5.97 m
Transport width:
3.05 m
Transport height:
2.83 m
Case 1150 K XLT

Case 1150 K XLT

Weight:
12.64 t
Transport length:
5.97 m
Transport width:
3.05 m
Transport height:
2.83 m
Shantui SD13-2

Shantui SD13-2

Weight:
13.7 t
Transport length:
4.849 m
Transport width:
3.06 m
Transport height:
2.988 m

Do you want to see more detailed comparison?

Show me!

Sell Case 1150 K XLT

Bulldozers appraisal with LECTURA Valuation

Valuation

Whether you need to know value of your Case 1150 K XLT or valuation of your Bulldozers fleet, LECTURA Valuation will help. Simply fill the machine details and see the price for Bulldozers in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Case 1150 K XLT easily from our partners

Spare parts

Do your lookup for high quality parts for Case 1150 K XLT online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Bulldozers spare parts easily today - worldwide.

Get parts for Case 1150 K XLT now!

Transport

Bulldozers Transport & Shipping Services

In case you want to transport your machine, take advantage of our services. Query the ideal transport quotes for Bulldozers based on dimensions and weight. Our partners offer major services to meet your needs.

Ask for transport price

Data provided by Lectura logo

News