2 CX III JCB 2 CX III Specifications & Technical Data (2008—2014)

Electrical and Instrumentation

12 volt negative ground, utilising wiring and connectors meeting IP69 water ingress test standard. Central fuse panel supplemented with main circuit breakers at battery positive terminal. Tachometer, engine coolant temp., fuel level, hourmeter clock. Audible and visual system for engine oil, transmission, park brake, battery, air cleaner, alternator. 900 CCA/110 A/hr. Radio speakers (cab), beacon (all). Controlled from both front and rear. 95 amp. 2 twin beam fixed position. 2 adjustable.

Steering

Full power hydrostatic system utilising the main hydraulic pump with integral steering priority valve. In the event of engine failure, emergency steering is maintained.

Engine Support System

Engine support system is designed for ease of daily checks, routine maintenance and longer service intervals. Fuel type Diesel. Fuel filter Replaceable spin-on cartridge plus water/sediment separator. Air cleaner Dual, dry element cyclonic type. Oil filter and lubrication Full flow, spin-on type filter. Cooling system Hot climate specification, pressurised 14.5 psi (1.0 bar) suction fan. Pressurised recovery tank.

Hydraulic System

The Open Centre system uses gear pumps with a power modulation valve that automatically varies hydraulic power to match digging conditions for extra performance and power. Open centre hydraulic system using simple and reliable high efficiency gear pump. Single pump system with priority valve to ensure metered supply to steering and main hydraulic system. Easily used, ergonomically positioned levers give excellent control of the loader and backhoe, thus reducing operator fatigue. A full flow 10 micron filter ensures that oil stays free of contaminants.

Static Dimensions

JCB Backhoe Loaders feature heavy duty one piece mainframe, componentised driveline and fully enclosed engine compartment. All fluid and component compartments are lockable using the ignition key.

Transmission

The JCB Transmissions are designed and built specifically for JCB Backhoe Loaders. They feature synchronised shifting in all gears. Powershuttle between forward and reverse. Ground speeds are designed to maximise production.

Backhoe Attachments

JCB backhoe buckets are designed specifically for use on JCB machines with pin positions to maximize tearout, load retention and straight wall digging characteristics.

Brakes

The JCB braking system ensures effective, fade-free braking. The self-adjusting, multi-disc arrangement is inboard mounted and is oil immersed for minimum maintenance and a long operating life. Twin brake pedals provide tighter turning circle and enhanced steering control on slippery ground. Automatic compensation ensures 'straight' machine braking. Disc diameter: 165 mm (6.5 in). Friction area: 130502 sq.mm (202 sq. in) per brake. The independent parking brake is mounted on the input shaft rear axle and will hold the machine on 1:3 gradients. It is an over-centre type, adjustable within the cab, with transmission disconnect to prevent premature brake pad wear. Park brake disc diameter: 285 mm (11.2 in). Friction area: 74984 sq.mm (116 sq. in).