Dressta 9.50 Backhoe Loader Specs & Dimensions (2007 - 2015)

Technical specs - 9.50 Dressta

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 7.7 t

Standard tyres: 12.5x18/16.9x28

Bucket capacity: 1.1 m³

Drive: A

Transport length: 7.18 m

Tear-out force: 58 kN

Engine manuf.: Iveco

Engine type: N45MNS

Engine power: 70 kW

More technical details, like: bucket width, bucket capacity backhoe, transport width, transport height, tear-out force backhoe, max. reach horizontal, dredging depth, max. discharge height, travel speed, model series, dimension lxwxh, displacement...

More technical details, like: bucket width, bucket capacity backhoe, transport width, transport height, tear-out force backhoe, max. reach horizontal, dredging depth, max. discharge height, travel speed, model series, dimension lxwxh, displacement, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, emission level, backhoe type, engine manufacturer, engine model, aspiration, rated speed, engine output - net, engine output - gross, transmission type, number of travel speeds, drive - 2wd / 4wd, service brake type, length - roading, height - over cab, maximum height, width, ground clearance, width - standard shovel, stabiliser type, maximum dig depth - longest dipper, dig depth - sae, dig depth - sae retracted dipper, dig depth - sae extended dipper, reach from slew pivot - non-extending dipper, reach from slew pivot - retracted dipper, reach from slew pivot - extended dipper, loading height - non-extending dipper, loading height - retracted dipper, dump height - general purpose, dump angle - general purpose, fuel tank, shovel capacity - standard general purpose, bucket tearout - non-extending dipper, shovel breakout - general purpose, operating weight are available in the full technical specs.

Basic model incl. ROPS cabin, standard shovel, rear with backhoe and standard bucket

Special equipment

Outrigger stabilisers: No
Clamshell: No
Forklift utility: No
Grabber: No
Diesel particulate filter: No
Aircondition: No

Download datasheets (PDF)

9.50 Dressta Specification for Europe (EN)

Dressta 9.50 FAQ

When was the Dressta 9.5 backhoe loader manufactured?

The Dressta 9.5 backhoe loader was manufactured from 2007 to 2015.

How much does the Dressta 9.5 backhoe loader weigh?

The Dressta 9.5 backhoe loader weighs 7.7 tons.

What is the transport length of the Dressta 9.5 backhoe loader?

The transport length of the Dressta 9.5 backhoe loader is 7.18 meters.

What are the undercarriage specifications of the Dressta 9.5 backhoe loader?

The Dressta 9.5 backhoe loader has an all-wheel drive system and comes equipped with standard tyres sized 12.5x18 and 16.9x28.

What is the tear-out force of the Dressta 9.5 backhoe loader?

The Dressta 9.5 backhoe loader has a tear-out force of 58 kN.

What is the bucket capacity of the Dressta 9.5 backhoe loader?

The Dressta 9.5 backhoe loader has a bucket capacity of 1.1 cubic meters.

How much is a Dressta 9.5 Backhoe loader (2007u20132015) worth?

The residual value of the Dressta 9.5 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Dressta 9.50 from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Dressta 9.50 with similar Backhoe Loaders

Dressta 9.50

Weight:: 7.7 t

Standard tyres:: 12.5x18/16.9x28

Bucket capacity:: 1.1 m³

Drive:: A

John Deere Construction 310L

Weight:: 6.65 t

Standard tyres:: F:12.5/80-18 F3 (12) R: 19.5-24 R4 (12)

Bucket capacity:: 0.77 m³

Drive:: A

New Holland 655 D

Weight:: 7.52 t

Standard tyres:: 16.5/85-28

Bucket capacity:: 1 m³

Drive:: H

Hydrema H 906 E-ESD

Weight:: 9.2 t

Standard tyres:: 500/70x28

Bucket capacity:: 1.4 m³

Drive:: A

Terex-Fermec 760

Weight:: 8.2 t

Standard tyres:: 16.9x30

Bucket capacity:: 1 m³

Drive:: A

Do you want to see more detailed comparison?

Show me!

Sell Dressta 9.50

Backhoe Loaders appraisal with LECTURA Valuation

Whether you need to get value of your Dressta 9.50 or valuation of your Backhoe Loaders fleet, LECTURA Valuation will help. Simply fill the equipment details and see the values for Backhoe Loaders in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Dressta 9.50 easily from our partners

Do your lookup for high quality parts for Dressta 9.50 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Backhoe Loaders spare parts easily today - worldwide.

Get parts for Dressta 9.50 now!

Transport

Backhoe Loaders Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Query the most appropriate transport quotes for Backhoe Loaders built on dimensions and weight. Our partners provide major services to satisfy your demands.

Ask for transport price