Pantera 4001 (24) Amazone Pantera 4001 (24) Specifications & Technical Data (2009—2013)

Intelligent operational management

Via the multi-function joystick and the AMADRIVE operator terminal, the Pantera offers comfortable and simple operation. At the same time, the AMATRON 3 on-board computer with its integrated GPS-Switch and GPS-Track systems make life enormously easier.

AMATRON 3 – the terminal for all plant protection functions

Thanks to the handy and clear AMATRON 3 on-board computer, you only need one terminal for the operation of the different boom and spray liquid circuit functions. On AMATRON 3 all relevant data is clearly displayed and the few necessary settings are quickly and easily done. AMATRON 3 features illuminated buttons and a high resolution, high contrast screen. All the information about the control of the sprayer is shown on the one display. Depending on the driving conditions and according to personal taste, you may choose either spraying function or the GPS function as a detailed view.

Flexible, fast and precise

Profi-fold – flexible and comfortable. All hydraulic functions can be carried out reliably and simply via AMATRON 3 from the cab. Actuation via the multi-function joystick is especially comfortable.

Weight distribution at the optimum!

The even weight transfer to the front and rear wheels is the ideal pre-condition for efficient traction. This is why the Pantera 4001 features, with a full tank, an optimum weight distribution of approximately 50 % - 50 % to each the front and rear axle. Depending on the tank level and the boom type, the weight distribution varies only by around 5%.

Pantera – high-powered intelligence

The powerful, 6 cylinder Deutz engine with Common-Rail injection technology and 200 HP convinces by its high efficiency and low fuel consumption. Thanks to the modern hydrostatic drive mechanism, you can drive the Pantera with absolute infinite variability. This system allows, even at low engine speeds, high start up torques and a very dynamic acceleration.

Operation at optimum fuel saving: ECO or POWER

The new and optimised engine revs regulation enables you to operate the Pantera always at the optimum fuel consumption efficiency. If ECO mode has been selected in the AMADRIVE terminal, the engine searches for the optimum operating point for torque and revs, depending on the relevant driving situation. When spraying on the flat, an engine rev reduction down to 1,200 RPM is possible. The automatic rev adaptation takes place constantly and sensibly between 1,200 and 1,900 RPM. If, however, you are working on steep slopes in hilly terrain, reinstate maximum output of up to 2,300 RPM via the POWER mode.

Good power/weight ratio

Of course, also the low unladen weight of the Pantera 4001 (9,300 kg with a 24 metre boom gives a good power/weight ratio) is an advantage for a low fuel consumption. So, the fuel tank volume of 230 litres enables high work rates over long days.

High output pumps

Twin high-performance, easily accessible piston diaphragm pumps (530 l/min.) ensure that the spraying process can even be conducted at high volumes and speeds and yet there is sufficient agitator capacity always available. The pump speed can be adjusted from choice within a range of 400 to 540 rpm. This enables you to drive with low revs, for example, at low application rates. High filling capacities with the 3" suction hose are achieved at revs as low as 800 RPM. The spray pump can be switched on and off at the operator station.

Pantera – the concept

The spacious cab, with its air-suspended driver’s seat and optimum all-round visibility makes for safe travelling and leaves you relaxed even after a long working day.

Get in and drive off! But above all, stay relaxed

In the spacious driver’s cab of the AMAZONE Pantera, you enjoy the highest possible level in creature comforts, the best all-round visibility and top operator convenience. In this way you are always in control of the self-propelled sprayer.

Feel at home – by day and night

The lighting concept of the Pantera offers you, the driver, the best view of the road, the field and the machine even at dusk or at night.

Traction control as standard

The drive torque of the four wheel motors is constantly being monitored electronically and then regulated to ensure the optimum vehicle behaviour even under difficult conditions. Power-hunger, physical differential locks are omitted. In the field, even in wet conditions, you will always comfortably get through. However, also on the road the ASR always ensures a safe trip.

Pantera – flexible intelligence

There is a clear division of responsibilities for the high quality Linde hydraulic pumps. Because of the large diameter wheels, very high torques are needed, especially when starting off from stationary. The intelligent drive concept of the Pantera doesn’t build up these high forces hydraulically but translates these into mechanical forces via the planetary gearboxes. This makes for a guaranteed drive when working in unfavourable ground conditions and when driving off. The electrically adjustable wheel motors are, depending on the driving situation, always optimally set, no matter whether maximum torque or maximum revs are required.

Intelligent chassis management

The unique tandem chassis provides a smooth, horizontal boom travel. Simultaneously, it ensures stability on slopes and offers a very simple to operate track width adjustment.

Intelligent plant protection management

Thanks to the Super L-boom with working widths of up to 40 m and Distance-Control automatic boom guidance you can fully concentrate on applying the correct amount of chemical.

Speed-Spraying

AMAZONE offers various levels of specification for increasing the speed, efficiency and cost-effectiveness of filling, transportation and cleaning. AMAZONE combines these technical benefits for enhanced crop protection application under the generic term Speed-Spraying.

AMACLICK with AMATRON 3

Special crops often require the on/off control of the individual part-width sections. AMACLICK is another ergonomic operating unit which can be used in conjunction with the joystick, or if required, also solely with AMATRON 3.

GPS-Switch for AMATRON 3

This GPS assisted on-board computer system automates the exact control of the machine on the headlands, around the field border and when spraying in wedges. The working width and the arrangement of the part width sections are taken into account. The automatic GPS-Switch part width section control offers precision, comfort and safety: Simply select the desired degree of overlapping and leave the switching off in automatic mode. So, even more difficult circumstances, such as wider working widths, limited visibility at dawn or dusk or in high crops can be mastered. In addition, you save on plant protection agents and also help to protect the environment. The driver can fully concentrate on monitoring the performance of the sprayer.

Pantera – with light-footed intelligence

The special tandem chassis of the Pantera not only ensures the perfect adaptation to ground undulations, but also a high boom stability – especially of course, in sloping terrain. Thanks to the level regulated hydro-pneumatic suspension, the Pantera operator also enjoys the maximum level of comfort. The combination of this unique chassis design and the proven AMAZONE boom suspension additionally ensures an optimally smooth boom ride even under the most arduous of conditions.

Track width adjustment in no time at all

The fully automatic track width adjustment, fitted as standard, enables you, for example as a contractor, to react quickly to the various demands of different customers. Once the desired track width has been pre-selected, the exact centimetre precise setting is carried out automatically.

Optimised for professional use!

The 4,000 litre spray agent tank, deeply positioned in the frame, ensures a favourable centre of gravity and an even weight transmission on to all four wheels of the Pantera. The spray agent and fresh water tank consist of high grade glass fibre reinforced plastic with smooth internal and external walls. The low positioned outlet sump ensures smallest residual volumes even in sloping terrain. The electronic fill-level indication and the three rotating high pressure nozzles for the internal cleaning are part of the standard equipment. The 500 litre rinse tank with fill-level indicator is located at the rear of the Pantera.

Standard: Comfort-Pack

With the Comfort-Pack, the Pantera features a professional equipment level for the automation of the spray agent liquid circuit. Control of the most important functions of the spray agent circuit (filling, agitator intensity and cleaning) are carried out remotely via the AMATRON 3. In this way the desired filling amount can be pre-selected and the filling procedure is automatically isolated. The Rührmatic system provides a continuous, fill-level dependent adaptation of the agitation intensity. When drawing in fresh water, the agitators are automatically shut off. For the treatment of the remaining area, the targeted addition of fresh water is possible. With the flushing function, the booms can be cleaned without changing the original concentration. The automatic cleaning provides a reliable dilution of residual amounts and internal tank cleaning. In addition to this automatic control, you can also actuate all the functions by hand on the operator station. Alternatively available as a special option: the bowser fill port which offers the possibility of filling under pressure.

Ingeniously simple – simply ingenious: DUS – the pressure recirculation system

The AMAZONE DUS pressure recirculation system guarantees the safe circulation within the entire system. When starting the spraying operation, all the hoses including the spray lines are filled under pressure in the reverse direction with the mixed spray agent. This means the spray lines are always full and immediately ready to use over the entire working width. There is no waiting on the headland. Every time individual part-width sections are shut off, during turning the operation and during transport, the spray liquid circulates continually thanks to the pressure control. This reliably prevents deposits, blockages or segregation in the spray lines. The concentration of the spray liquid always remains constant right up to the nozzles, so the start of spraying is carried out without any problems after, for example, a change of ingredients. During the cleaning operation, fresh water flushes the spray lines out right up to the nozzles without any spraying being necessary. During cleaning, the concentrated spray liquid is routed back into the spray liquid tank via the pressure recirculation system.

Pantera – with clever intelligence

AMAZONE booms in profile design At the same time: light – robust – compact – durable. On the Pantera self-propelled sprayer, the Super L boom proves its extraordinary qualities. Thanks to the special AMAZONE profile design, it is not only light and extremely sturdy but also very compact. Even with the maximum boom width of 40 m, the transport width is still only 2.55 m. In the transport position, the booms are located behind the cab. That means: no obstruction of the driver’s view and no dripping of liquid within reach of the cab. Premium boom quality ensures a long service life even when working at very high work rates.

Boom ride management: AutoLift or Distance-Control? It‘s your choice!

With the automatic AutoLift boom lift (standard execution), the boom is raised into the desired height every time the boom is switched off. During spraying, it lowers again to the target height. Alternatively, with Distance-Control automatic boom guidance, it is the perfect special option available. With the aid of Distance-Control, the boom follows the crop canopy, where it is automatically raised at the headland and further regulated for height and tilt. Distance-Control enables either the automatic height and tilt regulation, or tip angling and tilt adjustment in conjunction with Profi-fold II. The driver concentrates on the correct spray application; the computer concentrates on the optimum boom ride!

Border nozzles

For precision border spraying between two sensitive crops, the boundary nozzles can be used to make sure the spray pattern is accurately defined.

Additional nozzles

In order to extend the normal working width, an asymmetrical nozzle can also be switched on. This is particularly useful if the distances between tramlines are not precise enough.

Liquid fertilisation – mature solutions for high outputs

The Pantera is especially suited for liquid fertilisation: the use of high grade plastics, good paintwork and the virtually exclusive use of stainless steel ensures a long service life even for liquid fertilisation operation. For large droplet application of liquid fertiliser, AMAZONE offers multiple hole nozzles (3 or 7 hole) or also the FD sluice nozzle. On request, the Super L-boom can be equipped with a second spray line. The off-set nozzle bodies then allow the attachment of drag hoses in a distance of 25 cm. Stainless steel (VA) weights improve the position of the drag hoses in the standing crop.

Automatic steering

New to the Pantera is the option of automatic steering. The system comprises of a pre-fitted hydraulic valve kit, especially developed for the Pantera, and the AMAZONE System 150 (consisting of the steering system, an AGI-3 receiver with EGNOS correction, GX45 terminal and NMEA output cable). Automatic steering cannot be retrofitted.

Central lubrication

The fully automatic central lubrication system ensures that the correct maintenance schedule is adhered to, yet with a minimum of downtime and expenditure. With the Pantera, all the grease points are covered including the parallelogram frames.

Intelligent logistics

With the optionally offered drawbar, you can pull a two axle water tanker of up to 12 t total weight behind the Pantera. This makes for very high daily outputs, even when used as a one-man operation.