C CAB2300 320 6X2 R E6 Renault (2013 - 2026) lorry truck specs & dimensions

The Renault C CAB2300 320 6X2 R E6 is a rigid chassis truck manufactured by Renault since 2013. It is equipped with an engine powe…

The Renault C CAB2300 320 6X2 R E6 is a rigid chassis truck manufactured by Renault since 2013. It is equipped with an engine power of 235 kW and has a gross combination weight of 29.5 tons. The truck has a gross vehicle weight of 26 tons and a wheelbase of 4750 mm.

Technical specs - C CAB2300 320 6X2 R E6 Renault

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Gross vehicle weight
26 t
Gross combination weight
29.5 t
Drive type
6x2
Engine power
235 kW
Emission standard
EURO VI
Front suspension
B
Rear suspension
L
Wheelbase
4750 mm
Cab
GLOBAL CAB
Transmission type
A/man.
Model series
C

Download datasheets (PDF)

Renault C CAB2300 320 6X2 R E6 overview

Cabin

Cab exterior

Global cab All steel Cab, electro-zinc plated and cataphoretic paint treatment. Cab paint colour: White ekla technical code: 09350 Red badge Anti-spray deflectors Four point mechanical cab suspension. Hydraulic cab tilt. 2 heated, remote control rear view mirrors. Rear view mirrors for bodywork up to 2.55 m wide Fold-back front view mirror Air horn Roof-level air intake. Air filter clogging indicator Spray suppression on front wings External sun visor Tinted, laminated windscreen. Tinted rear cab window


Cab interior

Upper storage cupboard with net cover, 2 storage compartments (50 l) with net covers Three sun blinds on windscreen DTCO 4.0 digital chronotachograph Air-suspended driver's seat with fitted seat belt. Driver's armrest Red seat belts Adjustable passenger seat Blower socket on central console Removable rear storage compartment, right-hand side Raised engine tunnel. Cab lighting time-delay. Clothes rail Electrically operated door windows Handbook in Czech.


Engine

Options

Power mode inhibited after passing the 'hard spot' of the accelerator pedal Automatic engine cut-off (3 min) Automatic engine cut-off (5 min) Engine rear PTO: Splined hollow shaft output (DIN 5462). Continuous drive Rotation: as engine Max. torque: 600 Nm Ratio: 1/1 Position 12 o'clock Engine rear PTO: OPTIBRAKE: Combination of exhaust brake and valve compression braking. Full electronic management (power: 170 kW at 2800rpm), coupled to service brake Allison Hydraulic retarder (400 kW)


Dimensions / Weight / Chassis

Service

Bodywork bracket mounting holes. Bodybuilder suspensions control includes inhibition of suspension height regulation, platform kneeling, and height regulation. Additionally, there is an electrical provision for the crane.


Tyres / Axle

Chassis

Chassis protective paintwork, mineral grey colour technical code: 03650. Chassis reinforcement at rear drive axle. Standard rear overhang, pre-drilled for bodybuilder. Removable front towing cap, front under-run protection, and rear under-run bar. Closing cross member with pre-drilling for towing yoke. Engine air filter with easily removable cartridges. Two wheel chocks with bracket and side exhaust.


Bodywork

Body mounting brackets front and rear. Bodybuilder access through bulkhead. Orange LED side marker lights with reflector and provision for bodybuilder electronic box interface.


Buy & Rent

Compare Renault C CAB2300 320 6X2 R E6 with similar Rigid Chassis

Renault C CAB2300 320 6X2 R E6

Renault C CAB2300 320 6X2 R E6

Gross vehicle weight:
26 t
Gross combination weight:
29.5 t
Drive type:
6x2
Engine power:
235 kW

Transport

Rigid Chassis Transport & Shipping Services

In case you look into transport options for your machine, take advantage of our services. Search for the most appropriate transport quotes for Rigid Chassis built on transport dimensions and machine's weight. Our partners provide various options to satisfy your demands.

Data provided by Lectura logo

News

Transport News by LECTURA 28.07.2026