Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Telehandlers Telehandlers Kramer Kramer 804 specifications

    Technical specs - 804 Kramer

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal load at COG 0.8 t
    Standard tyres 27x10.0-15 AS ET 20
    Centre of gravity 500 mm
    Transmission type HY
    Lifting height 4 m
    Weight 2.27 t
    Transport length 2.717 m
    Transport width 1.413 m
    Transport height 1.9 m
    Travel speed 17 km/h
    Engine manuf. Yanmar
    Engine type 3TNV76
    Engine power 19.2 kW
    Engine power 26 HP
    Displacement 1.116 l
    Revolutions at max torque 3000 rpm
    No. of cylinders 3
    Emission level IIIA
    Max. Reach horizontal ###
    Capacity at full forward reach ###
    Capacity at full lift hight ###
    max. climbing ability ###
    Dimension lxwxh ###
    Max. torque ###
    Cylinder bore x stroke ###
    Weight ###
    Cab Position ###
    Chassis Type ###
    Levelling - Chassis ###
    Stabilisers ###
    Drive - 2W / 4W ###
    Transmission Type ###
    Telematics Available ###
    Engine Manufacturer ###
    Engine Model ###
    Emission Rating ###
    Aspiration ###
    Rated Speed ###
    Engine Output - Gross ###
    Tyre - Front Size ###
    Dimension Configuration ###
    Length - At Ground ###
    Length - Front Of Carriage ###
    Height - Over Cab ###
    Width - Operating ###
    Wheelbase ###
    Ground Clearance ###
    Lift Height - Maximum ###
    Reach - Maximum ###
    Unstabilised Lift Height - With Maximum Capacity ###
    Turning Radius - Over Tyres ###
    Lift Capacity - Maximum ###
    Lift Capacity - To Max Height ###
    Lift Capacity - To Max Reach ###
    Unstabilised Lift Capacity - Maximum ###
    Unstabilised Lift Capacity - To Max Height ###
    Unstabilised Lift Capacity - To Max Reach ###
    Fuel Tank ###
    Number Of Boom Sections ###
    Load Centre ###
    Lift Capacity - Fork Maximum ###
    Raise Time - Boom ###
    Extend Time - Boom ###
    Speed - Forward Maximum ###
    Speed - Reverse Maximum ###
    Operating Weight ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs, without additional hydraulic and shovel

    804 Kramer - Special equipment

    • Diesel particulate filter
    • StVZO Equipment
    • Inclination correction
    • Side displacement

    RAVAS iForks-32 weight scaling solution for your Kramer 804

    RAVAS iForks-32

    Successful RAVAS scale forks

    Fit iForks for your Kramer 804 and realise immediate cost savings

    Functions:

    Gross/net weighing

    Totalling with sequence number

    Weight data transfer to smart phone, tablet, handheld and WMS/ERP system

    Benefits:

    Installation within 5 minutes

    Completely wireless with digital calibration

    More information

    Download data sheets - Kramer 804

    X

    What do you think about this machine?


    Kramer products

    Check out 5 Kramer products here

    More about Kramer