WF 3000-1.0 NT Crown Walkie Stacker Specs & Dimensions (2012 - 2022)

Drive Unit and Brakes

The Crown engineered heavy-duty gearbox is designed for low noise, efficient power transmission and a lifetime of reliable use in the roughest applications. The drive unit mounts in the truck chassis with tapered roller bearings that disperse load forces evenly, reducing maintenance and downtime. The drive unit is equipped with an electromagnetic disc brake that is spring applied and electrically released. The brake is activated by the control handle position. The brake rotor and disc are easily accessed for inspection and replacement. Regenerative motor braking assists brake effort and improves component life.

Mast

High visibility two- and three-stage mast design features nested I-beams and cantilevered rollers. Lift cylinders are positioned within the outer I-beam profile for best visibility through the mast and clear view onto the forks tips during load handling. Mast cushioning between staging ensures smooth operation. Heavy-duty mast and chain rollers are sealed and lubricated for life. Mast design allows easy access to carriage rollers.

Fork Carriage

The WF series features fixed formed steel forks welded to a high visibility backrest. This design accommodates Euro pallets or other containers without bottom boards. The ST/SX series features adjustable hook-on ISO forks, which are ideally suited for all types of pallets and containers that have bottom boards or require four-way pallet entry.

X10® Control Handle

The centre-mounted control handle keeps the operator at a safe distance from the power unit in both left and right hand turns. Handgrips have an anti-static urethane cover for insulation from cold and vibration. Die cast aluminium alloy housing provides impact resistance. Modular circuit board design ensures high reliability while allowing for easy service. Full function control handle includes travel speed and direction, raise, lower, safety reverse button, performance setting switch, horn buttons and optional auxiliary hydraulic controls. Exclusive automatic Brake Override feature allows travel (creep speed) with the handle near vertical - a feature that greatly improves manoeuvrability in tight areas. The rabbit/turtle switch incorporates two levels of programmable travel performance to match operator experience and application requirements.

Hydraulic System

Heavy-duty hydraulic motor with integral pump and reservoir for maximum efficiency and durability. The hydraulic control module (HCM) provides quick, smooth initiation and stopping of lift function. Single-speed lift and two-speed lowering is standard. Cylinder rods are hard-chrome plated with polyurethane seals. Relief valve tuned to capacity protects all components in the hydraulic system.

Optional Equipment

1. Rubber drive tyre (WF 1.2 and SX)2. Vulkollan drive tyre (WF 1.0 and ST)3. Hand held diagnostic set for performance adjustment and truck diagnostic4. Load backrest5. WF: 750 x 1200 mmST/SX: 830 x 1200 mm6. Maintenance free or wet industrial battery options7. Battery watering systems8. SBE160 red battery connector9. Freezer conditioning -30° operating temperature (WF 1.2 and SX)10. Auxiliary hydraulics with sideshift (SX)11. Flashing light12. Travel alarm13. Work Assist™ accessories• Clip pad and hook• Storage pockets• Remote raise/lower control14. Without battery or charger15. Battery discharge indicator with hour meter and lift-lockout (WF 1.0 and ST)16. Fork length and fork spread options