ERP040VT Yale electric forklift specs & dimensions (2019 - 2026)

Yale ERP-VT Electric Trucks

Yale® ERP-VT electric trucks are available in 3000, 3500, and 4000 pound capacities designed for demanding applications that require clean, quiet-running, heavy-duty capability. These trucks are very maneuverable and offer plenty of power and high stacking ability, while also offering excellent ergonomics, reliability and maintenance ease.

Frame

The frame is a unitized construction, stress tested for durability. An integral step on both sides of the truck is provided for easy entry and exit. The truck has a two-piece floor plate that can be easily lifted out for service access. An easily removable counterweight top cover gives easy access to components. A stamped steel, gas spring-assisted hood allows easy changing of the battery.

AC Transistor Traction Control

AC technology offers smooth acceleration and directional changes, proportional regenerative braking, and the Auto Deceleration System. The controller converts battery power to three-phase AC power and adjusts frequency and current to meet performance demands. Performance control settings and extensive diagnostics are accessible by technicians through the display or a PC. A Vehicle System Manager (VSM) utilizing CANbus technology monitors and controls key truck components and systems. The advanced thermal management system monitors component temperature and gradually adjusts performance to prevent damage to key components.

Automatic Park Brake

The ERP-VT features an Automatic Park Brake that is applied by a spring when the truck is stationary. Upon sensing a demand at the accelerator pedal, the brake is released and held “off” via an electrical solenoid within the park brake assembly. A manual override lever, located underneath the floor plate, is provided to disengage the brake if the truck has to be moved during service conditions in the absence of power on the truck.

Wet Disc Brakes

The brake system features standard oil-cooled wet disc brakes, which are mounted inside the drive unit assemblies, protecting them against dirt and moisture. These low pedal effort brakes require no adjustments and very little maintenance, yet provide long service life.

Power Assisted Braking

Power Assisted Braking is accomplished via the VSM. The VSM monitors brake line pressure, and when this pressure exceeds a set threshold, it sends a signal to the traction controller to decelerate the traction motor proportionally to the brake pressure. The higher the brake pedal pressure being applied, the more quickly the truck will decelerate. The master cylinder is sealed and has an external fluid level sensor connected to an LCD icon/indicator on the instrument module. Additionally, the standard Auto Deceleration System automatically slows the truck when the operator’s foot is removed from the accelerator pedal, extending brake life.

Hydraulic Components

A transistor control hydraulic system is powered by a brushless, AC induction motor with wet coupling. The motor and pump are mounted on rubber isolators for reduced noise and vibration. A combination of flexible wire-braid hoses and steel tubing is used to simplify the hydraulic plumbing. These hydraulic lines are carefully routed and held in place to reduce possible damage. An easy-to-fill low fluid hydraulic filter located in the return line protects the hydraulic system from contaminants and helps provide long life. A by-pass relief valve permits oil flow in the event of the filter clogging.

Hydrostatic Power Steering

Hydrostatic power steering is standard, and the all-hydraulic design gives precise, reliable control while eliminating mechanical linkages and road shocks at the steering wheel. An infinitely adjustable tilt steering column provides excellent operator comfort and visibility.

Steering Axle

The steering axle is one-piece forged steel and is mounted to a rack and pinion hydraulic actuator. The actuator is mounted to the rear frame reinforced support plate, and it is totally enclosed for protection from dirt and debris.

Options

Couchant e-hydraulics Mini-leversFoot Directional Control PedalReturn to set tiltTelescoping Steering Column with Tilt MemoryFull suspension seats (with and without swivel)Battery rollersOverhead guard mounted headlightsLED and Halogen work light packagesLED Dome / Reading lightBasic and Premium LED Brake / Tail / Back-Up light packages10° Forward / 5° Back Tilt5° Forward / 4° Back TiltIntegral SideshifterIntegral Sideshifting Fork PositionerAudible Alarm – Reverse OperationLight – Amber strobeRubber cushion drive tires and steer tiresType “EE” UL constructionDual Rear View Mirrors or Panoramic Rear View MirrorFire Extinguisher48 VoltRapid / Fast ChargeDrive-in rack overhead guardCooler / Freezer Package or Subzero Freezer PackageSynchronous SteeringRed (HI-VIS) ELR (Emergency Locking Retractor) Non-cinch Seat BeltRed (HI-VIS) ELR (Emergency Locking Retractor) Non-cinch Seat Belt with Start InterlockLow Mount Display

Dual Drive Motors

Left and right hand AC Drive motors are individually mounted for easy servicing. The outer end of each motor drives a wheel through a planetary gear transmission. The transmissions use helical gears with tooth geometry that is optimized to minimize gear noise. Each drive motor is individually controlled, allowing for a “zero inside turning radius” scenario that provides excellent maneuverability.

Operator Interface Display

The repositioned display is conveniently located in the upper right area of the operator’s compartment. The display includes an hour meter, LCD display for status codes and descriptions, battery discharge indicator with lift interrupt, all LCD icons/indicators for brake fluid, seat belt indicator, performance mode indicator, and parking brake indicator. The display also permits access for service technicians to adjust performance control settings, allowing the truck to be customized to meet customer applications. Additionally, extensive diagnostics allow service technicians to quickly troubleshoot problems. Operator selectable performance modes are standard. Options for operator passwords and a pre-shift operator checklist are also available.

Additional Features

Additional features on the ERP-VT include an overhead guard, 42” forks, non-suspension seat, seat belt and an operator sensing switch. An infinitely adjustable tilt steering column, rubber floor mat, and an electric horn are also standard.