Nominal load at COG: 6t – Standard tyres: SE 2x/2 – Total width: 1590mm – Construction height: 2480mm – Centre of gravity: 600mm –…
Nominal load at COG: 6t – Standard tyres: SE 2x/2 – Total width: 1590mm – Construction height: 2480mm – Centre of gravity: 600mm – Voltage: 80V
Tecna is the manufacturer of the TH 60 electric forklift. The production years for this model are (2000 - 2014). Find here detailed specs for TH 60 electric powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Tecna.
All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel
Front dual drive transmission, with motors 10 + 10K, with two gear boxes formed by two independent parts, the gear box and the braking housing, where the multidiscs brake system, in oil bath, is located. The big size superelastic tyres gives to the transmission set big stability and very good performance.
Steering Axle
The steering axle incorporate, as a new feature, a turning radius up to 185°6, which permits an improved maneuvering compared to the traditional three wheels forklift trucks. The axle has two identical integrates two identical wheels of 16°6, which significantly improves the stability and maintenance of rear axle.
Brakes
The front axle brakes are multidisc system in constant bath of oil, actuated by a pedal of automotive-type having a long life. Electronic breaking with energy recovery. Hand brake for parking. Proportional electronic brake.
Frame
The frame designed by means of a computer using the system for finite methods, forms a very stable and robust set, integrating also the motors and the steering axle.
Handling
Masts
High visibility, Duplex, Duplex free lift and Triplex free lift. Nested U profiles are exceptionally torsion-resistant, featuring adjustable rollers that are greased for life. The masts are mounted on special bushings and linked with tilt cylinders to the frame. The significant overlap between profiles provides a high degree of stability to the assembly, which, combined with a motor pump of 22 KW, allows for high-speed lifting and excellent performance.
Performance
Motors and technologies AC
The drive motors, as well as the hydraulic one are CA, class F with protection IP20, without carbon brushes nor collector are prepared for the hardest applications. In case of contaminated atmosphere, they are dust and dirtiness resistant. The availability for selection of systems with different output gives acceleration and one very good lifting capacity. This is one of the greatest advantages of AC. This technology permits the machine components to be revised and checked at longer periods of time, which significantly reduces the costs for maintenance.
Safety
Battery
The serial battery TECNA perfectly fits its place, fixed in operating position by means of a well designed access, which secures protection from the truck roof to the driver. For that reason its extraction and placement back is realized in very short time.
Cabin & Equipment
Driving
The forklift truck operation has exceptional ergonomic conditions. Easy access to the operator compartment is provided due to its low height of construction (550 mm). The steering column's multi-positioning and the seat, which can be adjusted in height and resting, allow adaptation to the body characteristics of each person. The pedals are of automotive type, making it easy to adapt to the driving habit. Hydraulic levers, positioned where the hand reaches automatically, enable sensitive and precise control of all grand visibility mast movements, including tilting, lifting, and downloading. The hydrostatic steering is operated without any effort; the system for actuating the pump functions only as required by the steering wheel, guaranteeing great energy savings. Additionally, the vector control system permits easy changes from forward to reverse, offering smooth and dynamic operation. The noise level in the operator’s seat is according to Standard DIN 12 053, measuring less than 65 dB.
Buy & Rent
Used Tecna Electric forklifts for sale
LECTURA analyzes current offers from many sources about Electric forklifts. Find the selection of the best offers on often visited marketplaces presenting second hand Electric forklifts for sale in many countries.
Electric forklifts appraisal with LECTURA Valuation
Whether you need to calculate price of your Tecna TH 60 or valuation of your Electric forklifts fleet, LECTURA Valuation will help. Simply fill the machine details and see the values for Electric forklifts in few clicks.
Get spare parts for Tecna TH 60 easily from our partners
Do your lookup for high quality parts for Tecna TH 60 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Electric forklifts spare parts easily today - worldwide.
In case you look for a transport your machine, utilise our services. Check the ideal transport quotes for Electric forklifts built on transport dimensions and machine weight. Our partners provide extensive services to meet your demands.
LECTURA, a heavy machinery intelligence leader and technical data expert, has entered into a strategic partnership with Rental-Portal, a specialised digital marketplace for machinery hire. The collaboration connects in-depth equipment research directly with rental availability, offering professionals a seamless route from machine comparison to immediate rental.
.png)