Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Forklifts Electric forklifts Electric forklifts Linde Linde E25SH specifications

    Linde E25SH Specifications & Technical Data (2022-2022)

    Rate this machine now!

    Nominal load at COG: 2.5t – Standard tyres: Front: 23x9-10 / Rear: 200/50-10 – Total width: 1228mm – Construction height: 2242mm – Centre of gravity: 500mm – Voltage: 80V

    Technical specs - E25SH Linde

    Specification

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur.Contact our team with any change suggestion.

    • Nominal load at COG 2.5 t
    • Standard tyres Front: 23x9-10 / Rear: 200/50-10
    • Total width 1228 mm
    • Construction height 2242 mm
    • Centre of gravity 500 mm
    • Voltage 80 V
    • Traction motor 2x9 kW
    • Hoist motor 17 kW
    • Weight 5.06 t
    • Battery weight 1.86 t
    • Turning radius 1.99 m
    • Travel speed with / without load 20/20 km/h
    • Hoisting with / without load 0,44/0,51 m/s
    • Lowering with load 0.56 m/s
    • Drive system ###
    • Lifting height ###

    All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

    Carbon footprint calculation

    Calculate the carbon footprint of the Linde E25SH per hour of use:

    Or go directly to ERA Equipment CO2 Calculator

    service provided by ERA

    Buy & Rent

    Compare Linde E25SH with similar Electric forklifts

    No image available

    Linde E25SH

    Nominal load at COG: 2.5 t

    Standard tyres: Front: 23x9-10 / Rear: 200/50-10

    Total width: 1228 mm

    Construction height: 2242 mm

    Press 1 image
    Mitsubishi FB 20 KPAC

    Nominal load at COG: 2 t

    Standard tyres: SE 2x/2

    Total width: 1190 mm

    Construction height: 2142 mm

    Press 1 image
    Crown FC 4000 2,0

    Nominal load at COG: 2 t

    Standard tyres: 2x/2V

    Press 1 image
    MaxGermany MG-E 20

    Nominal load at COG: 2 t

    Standard tyres: 2x/2

    Total width: 1150 mm

    Construction height: 2045 mm

    Spare parts & Components

    Get spare parts for Linde E25SH easily from our partners

    Inquire the spare part you search for from our partners with a few easy steps and choose the best offer. Wether you are a dealer or an owner, LECTURA can point you to the right direction. Order the Electric forklifts spare parts easily today - worldwide.

    Events & News

    Material Handling News by LECTURA 25.05.2022

    Smart power packs for tough applications
    Smart power packs for tough applications

    The globally coveted S-Series celebrated its debut in 2018. With the special "Smart, Strong and Safe" features of the counterbalance trucks,...

    More industry news Listen to podcast
    X

    What do you think about this machine?

    Linde products

    Check out 21 Linde products here

    More about Linde