Z 49 N Carer electric forklift specs & dimensions (2010 - 2012)

Nominal load at COG: 4.9t – Standard tyres: SE 2x/2 – Total width: 1710mm – Construction height: 2700mm – Centre of gravity: 500mm…

Nominal load at COG: 4.9t – Standard tyres: SE 2x/2 – Total width: 1710mm – Construction height: 2700mm – Centre of gravity: 500mm – Drive system: D

Carer is the manufacturer of the Z 49 N electric forklift. The production years for this model are (2010 - 2012). Find here detailed specs for Z 49 N electric powered lift truck - in a form of table chart below and downloadable datasheet. Explore also the other forklift models produced by Carer.

Electric forklifts Carer Z 49 N

Technical specs - Z 49 N Carer

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal load at COG
4.9 t
Standard tyres
SE 2x/2
Total width
1710 mm
Construction height
2700 mm
Centre of gravity
500 mm
Drive system
D
Voltage
96 V
Traction motor
20 kW
Hoist motor
18 kW
Weight
8.45 t
Battery weight
2.3 t
Turning radius
2.48 m
Lifting height
3.7 m
Travel speed with / without load
16.8/19.2 km/h
Hoisting with / without load
0.33/0.5 m/s
Lowering with load
0.5 m/s
Model series
Z

All specifications and prices refer to basic models with standard fork carrier, 2 standard prongs without additional hydraulics, battery, charger. With Simplex mast (3,3m up to 10t • 5m > 10t load capacity). L = pneumatic tyres, x = drive, SE = superelastic, P = PUR (Elastollan, Vulkollan), V = solid rubber, ND = low-pressure tyres, 3 = three-wheel, 4 = four-wheel, 6 = six-wheel

Download datasheets (PDF)

Carer Z 49 N overview

Carer Z 49 N features overview

Z40-45-49N Series Trucks

Z40-45-49N series trucks provide low running costs, extended autonomy, high performance and excellent visibility. In addition, the turning radius is one of the best in this category. These characteristics make Z40-45-49N series ideal in any work situation; they can perform even the most difficult tasks with ease.


Drive

Steering axle

Z series utilize a tough rear axle that allows obtaining a very high steering angle. The hydraulic jack is installed in a protected position and the kinematic motions are equipped with spherical joints.


Power steering

The hydro-drive “Load sensing” type optimizes energy consumption and enhances dynamic performances perfectly combining the lightness of the steering wheel with the precision of the guide.


Braking system

The braking system is powerful and can be well modulated. The friction material used is asbestos free. The electronic braking energy regeneration occurs by reversing the direction of travel, released and lightly pressing the brake pedal. Constant use of electronic braking also considerably reduces the maintenance costs of the hydraulic braking system.


Electronics

All truck functions are managed by sophisticated microprocessor-controlled high frequency MOS electronics and regenerative braking. The chopper is protected against rainwater infiltration and is cooled by apposite fans. Installation behind the driver’s seat facilitates accessibility and maintenance. LED-type self-diagnosis system.


Performance

Masts

The lift units allow excellent visibility. The mast profiles are cold treated to provide optimum resistance to bending and twisting. The lift cylinders are external to the profiles. The integrated side shift does not reduce the rated capacity of the truck.


Cabin & Equipment

Comfort

Driving position is large and offers maximum visibility in every direction. The layout of controls and instruments on board follow the ergonomic dimensioning. The best driving position is easily achieved by adjusting the tilt angle and depth of the steering wheel column and act on the levers which adjust the wide seat. The large cushioned seat is adjustable in every direction and even under the weight of the operator. The armrests are reclining. A large handle with two wide steps provide access to the driver’s seat. Sensational visibility.


Buy & Rent

Used Carer Electric forklifts for sale

LECTURA analyzes current offers from many sources about Electric forklifts.
Find the selection of the best offers on often visited marketplaces presenting second hand Electric forklifts for sale in many countries.

Get in touch for more details:

Compare Carer Z 49 N with similar Electric forklifts

Carer Z 49 N

Carer Z 49 N

Nominal load at COG:
4.9 t
Standard tyres:
SE 2x/2
Total width:
1710 mm
Construction height:
2700 mm
Clark GEX 40

Clark GEX 40

Nominal load at COG:
4 t
Standard tyres:
SE
Total width:
1396 mm
Construction height:
2310 mm

Sell Carer Z 49 N

Electric forklifts appraisal with LECTURA Valuation

Valuation

Whether you need to see value of your Carer Z 49 N or valuation of your Electric forklifts fleet, LECTURA Valuation will help. Simply fill the form and see the pricing information for Electric forklifts in few clicks.

Valuate right now!

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Carer Z 49 N easily from our partners

Spare parts

Do your lookup for high quality parts for Carer Z 49 N online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Electric forklifts spare parts easily today - worldwide.

Get parts for Carer Z 49 N now!

Transport

Electric forklifts Transport & Shipping Services

In case you need to transport your machine, take advantage of our services. Examine the best fitting transport quotes for Electric forklifts created on dimensions and weight. Our partners provide major options to satisfy your requirements.

Ask for transport price

Data provided by Lectura logo

News