Manufacturer

    All manufacturers
    • Model
    • Make
    • Type
    • Built

    Lectura specs Cranes Tower Cranes - Trolley Boom - Top-slewing Tower Cranes - Trolley Boom - Top-slewing Comansa Comansa LC5013 specifications

    Comansa LC5013 crane - load chart, specs (2001 - 2008)

    Rate this machine now!

    Manufactured by Comansa, this is the LC 5013 tower crane - trolley boom - top-slewing. Find and download detailed specs and data s... Read more

    Manufactured by Comansa, this is the LC 5013 tower crane - trolley boom - top-slewing. Find and download detailed specs and data sheets for this machine here.

    This Comansa Tower crane - Trolley boom - top-slewing belongs to the smallest machine segment in the tower crane - trolley boom - top-slewing category. To be able to lift loads, the LC 5013 crane is equipped with a 50m-long boom. The LC 5013 Tower crane - Trolley boom - top-slewing has a maximum capacity of 5t. When carrying the maximum load the LC 5013 can reach up to 15.4m. It is safe to lift 1.2t at the crane's maximum reach. As stated in model specifications, the nominal torque is 800. The max. Hook height is 45.2m.

    The Comansa LC 5013 has been equipped and sold with Cabin, Add. Ballast and Cross girder. It has been sold without Undercarriage, Rail carrier and Climbing device as of 2008. More detailed specifications and machine descriptions can be found in the original Comansa LC 5013 specs data sheet.

    This model can be acquired for a list price between €107,000 and €137,000. Production of the LC 5013 in 2008.

    Comparisons of the LC 5013 Comansa with other tower cranes - trolley boom - top-slewing models reveal that, based on specifications and pricing, the model is similar to the Terex Peiner SK 76-F-TS 10.3, Raimondi MR 75-A as well as Potain E 10.14 C. Want more detailed specifications? Download the latest Comansa LC 5013 specs data sheet on LECTURA Specs today!

    Technical specs - LC5013 Comansa

    Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

    Nominal torque 800 kNm
    Max. load 5 t
    Load at max. Reach 1.2 t
    Reach at max. Load 15.4 m
    max. standard boom 50 m
    max. hook height 45.2 m
    Connection load 70 KVA
    max. reach ###
    Max. luffing jib ###
    min. luffing jib ###
    Tower height ###
    Ropes ###
    max. hoisting speed ###
    Tower system ###
    Drive system ###
    Hoist unit ###

    If alignment change (2/4) is possible, the loads for quadruple alignment applies. In case of crane on anchor bolt, the anchor is not included in base price. Incl. concrete ballast, crane control and spindles with plates (latter not valid with rail-bound travelling, incl. cable drum and cruciform base)

    LC5013 Comansa - Special equipment

    • Cabin
    • Add. ballast
    • Rail carrier
    • Climbing device
    • Undercarriage
    • Cross girder
    X

    What do you think about this machine?

    Compare Comansa LC5013 with other models

    Press 1 image

    Comansa LC5013

    800kNm

    5 t

    1.2 t

    Comansa products

    Check out 3 Comansa products here

    More about Comansa