LC400 Comansa crane - load chart, specs & dimensions (2001 - 2008)

The LC 400 tower crane - trolley boom - top-slewing model is manufactured by Comansa. Find and download detailed specs and data sh…

The LC 400 tower crane - trolley boom - top-slewing model is manufactured by Comansa. Find and download detailed specs and data sheets for this machine here.

The LC 400 is categorised in the biggest machine segment in the tower crane - trolley boom - top-slewing category. To be able to lift loads, the LC 400 crane is equipped with a 80m-long boom. The LC 400 Tower crane - Trolley boom - top-slewing has a maximum capacity of 18t. When carrying the maximum load the LC 400 can reach up to 15.9m. The datasheet for LC 400 indicates that this model can carry a 3t load at max. Reach. As stated in model specifications, the nominal torque is 4000. Based on model specifications, the LC 400 max. Hook height is 64.9m.

The Comansa LC 400 has been equipped and sold with Cross girder, Cabin and Add. Ballast. It has been sold without Undercarriage, Climbing device and Rail carrier as of 2008. Find detailed specifications and machine details in the original Comansa LC 400 datasheet.

The production in 2008, where this LC 400 was available at a new list price between €495,000 and €629,000.

Based on other specifications and pricing variations, the Comansa LC 400 can be considered similar to the Terex Comedil (Zeppelin) CTT 331, Terex Comedil (Zeppelin) CTT 331 and Terex Comedil (Zeppelin) CTT 321-16. Want more detailed specifications? Download the latest Comansa LC 400 specs data sheet on LECTURA Specs today!

Technical specs - LC400 Comansa

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Nominal torque
4000 kNm
Max. load
18 t
Load at max. Reach
3 t
Reach at max. Load
15.9 m
max. standard boom
80 m
max. hook height
64.9 m
Connection load
80 KVA

More technical details, like: max. reach, max. luffing jib, min. luffing jib, tower height, ropes, max. hoisting speed, tower system, drive system, hoist unit, model series are available in the full technical specs.

If alignment change (2/4) is possible, the loads for quadruple alignment applies. In case of crane on anchor bolt, the anchor is not included in base price. Incl. concrete ballast, crane control and spindles with plates (latter not valid with rail-bound travelling, incl. cable drum and cruciform base)

Special equipment

Cabin
Yes
Add. ballast
Yes
Rail carrier
No
Climbing device
No
Undercarriage
No
Cross girder
Yes

Machine inspection

Ask for inspection of your Comansa LC400 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Provided by: Mevas — The Heavy Equipment Inspectors

Spare parts & Components

Get spare parts for Comansa LC400 easily from our partners

Spare parts

Do your lookup for high quality parts for Comansa LC400 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Tower Cranes - Trolley Boom - Top-slewing spare parts easily today - worldwide.

Transport

Tower Cranes - Trolley Boom - Top-slewing Transport & Shipping Services

In case you look into transport options for your machine, apply our services. Check the most appropriate transport quotes for Tower Cranes - Trolley Boom - Top-slewing built on transport dimensions and weights. Our partners provide large-scale services to satisfy your demands.

Data provided by Lectura logo

News

Lifting and access News by LECTURA 28.06.2026