16000 Manitowoc crane - load chart, specs & dimensions (2009 - 2022)

Vision operator’s cab

The Vision Cab™ is a fully enclosed and insulated steel module mounted to the left front corner of the rotating bed. The module is equipped with power tilt, a sliding door, large safety glass windows, front and roof windshield wipers, a dome light, a sun visor and shade, a fire extinguisher, air conditioning, swing and travel alarms, and a radio/CD player as standard equipment. The operator’s station swings over the front of the rotating bed for transportation. An optional feature includes nylon protective window covers.

Engine

Cummins Model QSX15 – C500 diesel, 6 cylinder, 372 kW (500 BHP) at 1800 governed RPM. Includes pump drive disconnect for easier starting, engine block heater (120V), ether starting aid, high silencing muffler, hydraulic oil cooler, radiator and fan. Multiple hydraulic pump drive transmission provides power for all machine functions. Two 12 volt maintenance-free batteries, 1400 CCA at -18°C (0° F), 24 volt system and 100 amp alternator. One diesel fuel tank, 946 L (250 gal.), with level indicator in operator’s cab. Optional: Cold-weather package with heater for fluids, and computer display.

Hydraulics

Our closed-loop system provides a separate hydraulic circuit to power each crane function. The result is truly independent, variable-speed operation of the swing, load hoist, boom hoist and travel functions.

Controls

Modulating electronic-over-hydraulic controls provide infinite speed response directly proportional to control lever movement. Controls include Manitowoc’s exclusive EPIC™ Electronically Processed Independent Control system with CAN-BUS technology providing microprocessor driven control logic, pump control, onboard diagnostics, and service information. Block-up limit control is standard for hoist and whip lines. Integrated Rated Capacity Limiter system (RCL) is standard for main boom and upper boom point. “Function cut-out” or “warning only” operation is selected via a keyed switch on the RCL console. Travel and swing alarms are standard. Optional: Anemometer (wind speed indicator). Booms and jibs are pre wired for anemometer.

Hydraulic System

Six high-pressure piston pumps, driven by a multi-pump transmission, provide independent closed-loop hydraulic power for the hoisting drums, boom hoist, swing, left crawler and right crawler. Hydraulic reservoir capacity is 719 L (190 gal.) and is equipped with breather, clean out access, and internal diffuser. Each function is equipped with relief valves to protect the hydraulic circuit from overload or shock. The system includes an oil cooler and replaceable, full flow filter. All oil is filtered before entering the hydraulic pumps. The hydraulic system also includes pump transmission disconnect and hydraulic oil cooler.

Swing system

Bearing adapter-mounted independent swing is powered by a fixed-displacement hydraulic motor coupled to an internal brake and planetary reduction. Includes Manitowoc Patented swing lock. Swing system maximum speed: 2.2 rpm.

Moving mast hoist system

Independent moving mast hoist with two grooved drums, each 32,5 cm (12-13/16") wide and 64,1 cm (25-1/4") diameter drum grooved for 1-1/8" diameter wire rope. Includes 498 m (1,620’) of 1-1/8" wire rope for 26-part line reeving. Drum is powered by 2 variable-displacement hydraulic motors coupled to integral brake and planetary reduction gearboxes. Ratcheting pawl and rotation indicator are standard.

Boom support system

Moving Mast Moving Mast is 9,75 m (32’) long and connects the boom hoist reeving to the steel boom suspension strap rigging. When used with the optional self-erect package, the mast is used for crane assembly and disassembly. It is capable of lifting and positioning the crawler assemblies, stacking the counterweights, and assembling the boom and luffing jib. Spring cushioned boom stop and automatic boom stop are standard.

Carbody

Connects rotating bed to crawler assemblies. High strength fabricated steel assembly with FACT connection system for safe, fast installation and removal of crawler assemblies.

Crawlers

Crawler assemblies are 10,4 m (34’ 2”) long with 1,5 m (60”) wide cast steel crawler pads and automatic lubricated intermediate rollers. Each crawler is identical and can be mounted on either side of the carbody. Each crawler is powered independently by a variable displacement hydraulic motor and includes two hydraulically powered pin actuators for fast installation and removal from carbody. Carbody mounted drive motors are connected to crawler final reduction via drive shaft with guard. Crawlers provide ample tractive effort for counter rotation with full rated load. Maximum ground speed of 1,24 kph (0.77 mph).