WA380-8E0 Komatsu WA380-8E0 Specifications & Technical Data (2016—2020)

Model rating
7,00 / 10

The Komatsu WA380-8E0 is a wheel loader manufactured by Komatsu from 2016 to 2020. It has a weight of 18.36 tons and a transport l…

The Komatsu WA380-8E0 is a wheel loader manufactured by Komatsu from 2016 to 2020. It has a weight of 18.36 tons and a transport length of 8.27 meters. The bucket width is 2.99 meters, and it has a maximum discharge height of 2.855 meters. The travel speed of this wheel loader is 40 km/h. The transport width is 2.765 meters, and the transport height is 3.395 meters. It has a lifting force of 146 kN and a turning radius outside of 7.28 meters. The bucket capacity ranges from a maximum of 6.5 cubic meters to a minimum of 3.2 cubic meters. Additionally, it is equipped with air conditioning.

Visit Komatsu live at

Technical specs - WA380-8E0 Komatsu

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
18.36 t
Standard tyres
23.5 R25
Bucket width
2.99 m
Bucket capacity min.
3.2 m³
Bucket capacity max.
6.5 m³
Steering mode
KL
Transport length
8.27 m
Transport width
2.765 m
Transport height
3.395 m
Travel speed
40 km/h
Max. discharge height
2.855 m
Turning radius outside
7.28 m
Lifting force
146 kN
Model series
WA
Engine manuf.
Komatsu
Engine type
SAA6D107E3
Engine power
142 kW
Displacement
6.69 l
Revolutions at max torque
1450 rpm
Max. torque
941 Nm
No. of cylinders
6
Cylinder bore x stroke
107x124 mm
Emission level
IV

Basic model with ROPS cabin, std. shovel and teeth

Special equipment

Diesel particulate filter
No
Swing loader
No
telescopic
No
Aircondition
Yes
Quick hitch hydr.
No
Quick hitch mech.
No

Download datasheets (PDF)

Komatsu WA380-8E0 FAQ

When was the Komatsu WA380-8E0 manufactured?

The Komatsu WA380-8E0 was manufactured from 2016 to 2020.

How much does the Komatsu WA380-8E0 weigh?

The Komatsu WA380-8E0 weighs 18.36 tons.

What are the transport dimensions of the Komatsu WA380-8E0 wheel loader?

The Komatsu WA380-8E0 has a transport length of 8.27 meters, a transport width of 2.77 meters, and a transport height of 3.4 meters.

What is the travel speed of the Komatsu WA380-8E0 wheel loader?

The Komatsu WA380-8E0 has a travel speed of 40 km/h.

What is the standard tyre size of the Komatsu WA380-8E0?

The Komatsu WA380-8E0 is equipped with standard tyres sized 23.5 R25.

What are the maneuverability specifications of the Komatsu WA380-8E0 wheel loader?

The Komatsu WA380-8E0 has an articulated-frame steering mode and an outside turning radius of 7.28 meters.

What is the lifting force of the Komatsu WA380-8E0?

The Komatsu WA380-8E0 has a lifting force of 146 kN.

What is the maximum discharge height of the Komatsu WA380-8E0?

The Komatsu WA380-8E0 has a maximum discharge height of 2.86 meters.

What are the bucket specifications of the Komatsu WA380-8E0 wheel loader?

The Komatsu WA380-8E0 wheel loader has a bucket with a maximum capacity of 6.5 cubic meters, a minimum capacity of 3.2 cubic meters, and a width of 2.99 meters.

How much is a Komatsu WA380-8E0 Wheel loader (2016u20132020) worth?

The residual value of the Komatsu WA380-8E0 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Events

Visit Komatsu live at

NordBau 2026

Holstenhallen Neumünster, Germany

September
NordBau 2026

Machine inspection

Ask for inspection of your Komatsu WA380-8E0 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Provided by: Mevas — The Heavy Equipment Inspectors

Buy & Rent

Compare Komatsu WA380-8E0 with similar Wheel Loaders

Komatsu WA380-8E0

Komatsu WA380-8E0

Weight:
18.36 t
Standard tyres:
23.5 R25
Bucket width:
2.99 m
Bucket capacity min.:
3.2 m³
Sany SW405K

Sany SW405K

Weight:
18.5 t
Bucket width:
2.975 m
Bucket capacity min.:
3 m³
Uranos ZL 50 G

Uranos ZL 50 G

Weight:
17.5 t
Standard tyres:
23.5-25-16 PR
Bucket capacity min.:
3 m³
Lishide CL956-4

Lishide CL956-4

Weight:
17 t
Bucket width:
2.915 m
Bucket capacity min.:
4 m³
XGMA XG958i

XGMA XG958i

Weight:
17.5 t
Standard tyres:
23.5-25
Bucket capacity min.:
3 m³

Do you want to see more detailed comparison?

Show me!

Sell Komatsu WA380-8E0

Wheel Loaders appraisal with LECTURA Valuation

Valuation

Whether you need to calculate value of your Komatsu WA380-8E0 or valuation of your Wheel Loaders fleet, LECTURA Valuation will help. Simply fill the machine information and see the values for Wheel Loaders in few clicks.

Data provided by Lectura logo

Spare parts & Components

Get spare parts for Komatsu WA380-8E0 easily from our partners

Spare parts

Do your lookup for high quality parts for Komatsu WA380-8E0 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Wheel Loaders spare parts easily today - worldwide.

Transport

Wheel Loaders Transport & Shipping Services

In case you look for a transport your machine, apply our services. Check favourable transport quotes for Wheel Loaders built on transport dimensions and weight. Our partners provide comprehensive services to fit your demands.

Data provided by Lectura logo

News

Construction News by LECTURA 22.06.2026