P&H L-1850 Komatsu P&H L-1850 Specifications & Technical Data (2021—2026)

The Komatsu P&H L-1850 is a wheel loader manufactured since 2021. It has a weight of 242.67 tons and a transport length of 18.9 me…

The Komatsu P&H L-1850 is a wheel loader manufactured since 2021. It has a weight of 242.67 tons and a transport length of 18.9 meters. The bucket capacity is 30.58 cubic meters, with a width of 6.4 meters. The maximum discharge height is 6.83 meters. It has a travel speed of 19.31 km/h and a transport width of 6.04 meters. The transport height is 6.73 meters. The turning radius outside is 14.38 meters.

Wheel Loaders Komatsu P&H L-1850

Visit Komatsu live at

Technical specs - P&H L-1850 Komatsu

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight
242.67 t
Standard tyres
58/85-57 L4
Bucket width
6.4 m
Bucket capacity
30.58 m³
Transport length
18.9 m
Transport width
6.04 m
Transport height
6.73 m
Travel speed
19.31 km/h
Max. discharge height
6.83 m
Turning radius outside
14.38 m
Model series
P&H
Engine manuf.
MTU Detroit
Engine type
16V series 4000
Engine power
1491 kW
No. of cylinders
16
Emission level
Tier 2

Basic model with ROPS cabin, std. shovel and teeth

Special equipment

Diesel particulate filter
No
Swing loader
No
telescopic
No
Aircondition
No
Quick hitch hydr.
No
Quick hitch mech.
No

Download datasheets (PDF)

Komatsu P&H L-1850 FAQ

When was the Komatsu P&H L-1850 manufactured?

The Komatsu P&H L-1850 was first produced in 2021.

How much does the Komatsu P&H L-1850 weigh?

The Komatsu P&H L-1850 weighs 242.67 tons.

What are the transport dimensions of the Komatsu P&H L-1850 wheel loader?

The Komatsu P&H L-1850 has a transport length of 18.9 meters, a transport width of 6.04 meters, and a transport height of 6.73 meters.

What is the travel speed of the Komatsu P&H L-1850 wheel loader?

The Komatsu P&H L-1850 has a travel speed of 19.31 km/h.

What are the undercarriage specifications of the Komatsu P&H L-1850 wheel loader?

The Komatsu P&H L-1850 wheel loader is equipped with standard tyres sized 58/85-57 L4.

What is the outside turning radius of the Komatsu P&H L-1850 wheel loader?

The Komatsu P&H L-1850 wheel loader has an outside turning radius of 14.38 meters.

What is the maximum discharge height of the Komatsu P&H L-1850?

The Komatsu P&H L-1850 has a maximum discharge height of 6.83 meters.

What are the specifications of the bucket on the Komatsu P&H L-1850 wheel loader?

The bucket of the Komatsu P&H L-1850 has a capacity of 30.58 cubic meters and a width of 6.4 meters.

How much is a Komatsu P&H L-1850 Wheel loader (2021u20132025) worth?

The residual value of the Komatsu P&H L-1850 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Komatsu P&H L-1850 overview

Komatsu P&H L-1850 features overview

Structural

Frames are fabricated from high strength, low-alloy steel with excellent weld characteristics and extreme low temperature properties. The front axle is an integral, fixed part of the front frame. The rear axle center oscillates ±10°. Liners for ground load shock events are utilized in multiple joint locations (lift arms, rear axle, frame articulation, hoist cylinders). These joints are superior in absorbing and distributing multi-directional stresses. Features easily replaceable brass liners for long life and easy maintenance. High strength castings are used in key areas of fabricated structures to reduce stress and improve structural life.


Hydraulic system

Braking system

Primary brake system The service braking system is controlled from the accelerator pedal and can bring the loader to a full stop without application of mechanical brakes. Secondary brake system An independent friction core speed disc brakes. Single disc caliper on each traction motor (4) Emergency fail safe fail brakes are spring applied in the event of air pressure loss. Parking brake system Spring applied, air release traction motor speed disc brakes.


Air filtration

Primary Self cleaning KleanAir filtration system 99.9% efficiency removing to 0.3 microns (nominal) Extends maintenance intervals Filtered air for engine, drive system cooling and pressurized cab Secondary Dual safety filters for engine.


Events

Visit Komatsu live at

NordBau 2026

Holstenhallen Neumünster, Germany

September —
NordBau 2026

Machine inspection

Ask for inspection of your Komatsu P&H L-1850 from experts

Machine inspection

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by: Mevas — The Heavy Equipment Inspectors

Spare parts & Components

Get spare parts for Komatsu P&H L-1850 easily from our partners

Spare parts

Do your lookup for high quality parts for Komatsu P&H L-1850 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Wheel Loaders spare parts easily today - worldwide.

Get parts for Komatsu P&H L-1850 now!

Transport

Wheel Loaders Transport & Shipping Services

In case you want a transport for your machine, take advantage of our services. Query the ideal transport quotes for Wheel Loaders formed on dimensions and weight. Our partners provide major services to meet your wishes.

Ask for transport price

Data provided by Lectura logo

News