W 36 Case W 36 Specifications & Technical Data (1977—2020)

Service

Simplified access to service check points is a time saving benefit of the W36. The radiator grille guard swings open providing access to the batteries and filler neck of the fuel tank. A visual gauge near the top of the radiator shows coolant level at a glance. Behind side panels on the left are the engine oil dipstick and filter, and grease fittings for the rear axle trunnion — eliminates crawling under the machine for lubrication. The transmission dipstick is also easily reached from the left side near the articulation joint. Hydraulic oil sight gauge is visible from ground level on the right side, or through the rear window of the cab.

Sealed Loader Linkage

All W36 loader linkage and hinge pins are sealed for long life and reduced maintenance. Recommended maximum lubrication interval of 100 hrs. reduces maintenance time while protecting vital wear points.

185 net horsepower

Turbocharged, Case-built diesel delivers 185 net hp at low 2200 rpm. Combines fast response for quick acceleration with high torque for crowding the pile or bank.

4-speed full power shift transmission

Dual levers for positive speed and directional engagement. Change direction on-the-go without braking for fast cycles. Efficient speed ranges matched for power in first and second, and speed for travel in 3rd and 4th — up to 20 mph.

185 net horsepower, turbocharged diesel

Case-built 504 in.³ displacement, 6-cylinder, turbocharged diesel with open chamber design and direct injection. Five hole injection nozzle design and high fuel line pressure atomizes fuel for complete combustion. Stellite-faced valves, stress relieved cylinder heads, and induction hardened cylinder liners add to service life.

Power Shift Transmission

4-speed forward, 4-speed reverse full power shift transmission. On-the-go directional changes without decelerating or braking; keeps engine speed up, hydraulics cycling fast for added productivity. Dual transmission controls — one for directional changes, the other for gear selection — are closely grouped and within easy reach of the left hand.

Outboard-mounted planetary final drives

Final gear reduction occurs at the ends of each axle through planetary gear sets. Outboard mounting relieves axle shafts from carrying high torque loads to the wheels and makes planetaries easily accessible. Helps reduce maintenance time and servicing procedures.

Rear axle oscillation

Rear axle oscillates total of 24° up and down. One wheel can drop up to 17.5" with all wheels remaining on the ground for maximum traction.

Piston oil cooling

Underside of pistons and wrist pins are cooled by a continuous spray of oil. Keeps peak piston temperature lower and reduces chance for carbon buildup.

Intercooling

Intake air is kept at a uniform temperature by an integral water-to-air intercooler. Intercooling lowers peak cylinder pressure and thermal stresses on pistons and rings for increased life.

Low Profile

The W36 - with the Low Profile design - is well within highway height restrictions when transported on a low-boy trailer.

Up-front operator's compartment

Up-front location helps isolate noise and vibration from the operator's compartment. Visibility to the bucket and work area are in a straight line providing optimum visibility for loading and dumping.

In-line loader linkage

Hydraulic cylinders and linkage are in-line with the lift arms providing minimum interference with operator's vision to the bucket and work area. Torsional motion of components is minimized because loading stresses are absorbed by components within the same plane.

Air-assist loader controls

Conveniently located dual levers feature air-assisted controls. Low lever effort reduces operator fatigue in high production applications, increasing operator efficiency. Gives "fine control" feel during grading work.

Pod Cab — The Quiet Zone

The Pod Cab option provides ample room for comfortable operation without sacrificing good visibility to the bucket, along the sides or to the rear of the W36. Up-front mounting and standard equipment sound suppression materials help dampen engine noise and vibration. Air pressurization is also standard. For added comfort, options include a 6-way adjustable air suspension seat, 24,000 Btu air conditioner, 31,900 Btu heater and a defogger. All comfort controls are in a console at the operator's left, while the loader controls are conveniently located to the right.

3½ — 4 yd³ bucket capacity

Big enough for the tough jobs like quarry work and overburden removal, plus the size loads that keep trucks moving and hoppers full. Its the right loader wherever you have to work it.

Lift height

With a dump clearance of 9'11", W36 operators should have little trouble clearing the side boards of most trucks or charging hoppers.