TA 3 Terex TA 3 Specifications & Technical Data (2010—2017)

Weight: 2.28t – Standard tyres: 295/80x15.3 10ply – Net load: 3t – Dump capacity: 1.95m³ – Dumper type: V – Transport length: 4m

TA 3

Years of manufacture: 2010—2017

Data sheet
Buy & Rent
Valuate & Sell
Spare parts
Transport
News

Technical specs - TA 3 Terex

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 2.28 t

Standard tyres: 295/80x15.3 10ply

Net load: 3 t

Dump capacity: 1.95 m³

Dumper type: V

Transport length: 4 m

Transport width: 1.957 m

Transport height: 2.92 m

Travel speed: 19 km/h

Loading height: 0.208 m

Turning radius outside: 4.711 m

Model series: TA

Engine manuf.: Kubota

Engine type: V2203M

Engine power: 32.4 kW

Displacement: 2.197 l

Emission level: III A

More technical details, like: dimension lxwxh, revolutions at max torque, max. torque, no. of cylinders, cylinder bore x stroke, model type, driveline, rops, fops, engine manufacturer, engine model, emission rating, rated speed, engine output, torque, fuel, drive, tyre size - front, tyre size - rear, service type, height over rops, width, overall length, wheelbase, ground clearance, skip lip height - untipped, turning radius - outside, chassis articulation, payload - heaped, payload - struck, payload - water, skip payload, travel speed - maximum, operating weight - unladen are available in the full technical specs.

Basic model with ROPS cabin and std. trough

Special equipment

Diesel particulate filter: No
Heated dump body: No
All-wheel drive: Yes
Track: No
Aircondition: No

Download datasheets (PDF)

Terex TA 3 FAQ

When was the Terex TA 3 manufactured?

The Terex TA 3 was manufactured from 2010 to 2017.

How much does the Terex TA 3 wheel dumper weigh?

The Terex TA 3 wheel dumper weighs 2.28 tons.

What are the transport dimensions of the Terex TA 3 wheel dumper?

The Terex TA 3 has a transport length of 4 meters, a transport width of 1.96 meters, and a transport height of 2.92 meters.

What is the travel speed of the Terex TA 3 wheel dumper?

The Terex TA 3 has a travel speed of 19 km/h.

What are the undercarriage specifications of the Terex TA 3 wheel dumper?

The Terex TA 3 wheel dumper is equipped with standard tyres sized 295/80x15.3 10ply.

What is the turning radius of the Terex TA 3 wheel dumper?

The Terex TA 3 wheel dumper has an outside turning radius of 4.711 meters.

What is the material handling capacity of the Terex TA 3 wheel dumper?

The Terex TA 3 wheel dumper has a net load capacity of 3 tons and a dump capacity of 1.95 cubic meters.

How much is a Terex TA 3 Wheel dumper (2010u20132017) worth?

The residual value of the Terex TA 3 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Terex TA 3 overview

Skip

Features

Large heaped skip capacities. "Rental Tough" designs and fabrications to keep you working in the toughest of conditions. Thick steel skip base plate with reinforced box sections for high strength and longevity. Exceptional service access and ease of maintenance built into every machine. High ground clearance, low centre of gravity for superb stability and site accessibility. Powerful, reliable and economical Kubota engines. Power Tip (TA3 / TA3H) for forwards tip applications. Power Swivel (TA3S / TA3SH) enables effective placement of load to either side - useful for trench filling or small sites.

Machine inspection

Ask for inspection of your Terex TA 3 from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Terex TA 3 with similar Wheel Dumpers

Terex TA 3

Weight:: 2.28 t

Standard tyres:: 295/80x15.3 10ply

Net load:: 3 t

Dump capacity:: 1.95 m³

Thwaites Alldrive 4000 HI/DR

Weight:: 1.95 t

Standard tyres:: 10/75x15.8

Net load:: 1.5 t

Dump capacity:: 0.78 m³

Do you want to see more detailed comparison?

Show me!

Sell Terex TA 3

Wheel Dumpers appraisal with LECTURA Valuation

Whether you need to see value of your Terex TA 3 or valuation of your Wheel Dumpers fleet, LECTURA Valuation will help. Simply fill the equipment details and see the pricing information for Wheel Dumpers in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Terex TA 3 easily from our partners

Do your lookup for high quality parts for Terex TA 3 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Wheel Dumpers spare parts easily today - worldwide.

Get parts for Terex TA 3 now!

Transport

Wheel Dumpers Transport & Shipping Services

In case you need to transport your machine, take advantage of our services. Check the most appropriate transport quotes for Wheel Dumpers formed on dimensions and weight. Our partners provide major services to satisfy your wishes.

Ask for transport price