Terex-Fermec 980 Backhoe Loader Specs & Dimensions (2004 - 2006)

Technical specs - 980 Terex-Fermec

Specification

Notice: Every data listed is verified by LECTURA Specs team experts. However, incomplete data and mistakes might occur. Contact our team with any change suggestion.

Weight: 8.5 t

Standard tyres: 16.9x24

Bucket capacity: 1.2 m³

Drive: A

Transport length: 6.21 m

Transport width: 2.38 m

Transport height: 3.8 m

Engine manuf.: Perkins

Engine type: 1104C-44T

Engine power: 74.4 kW

Displacement: 4.4 l

Revolutions at max torque: 2200 rpm

More technical details, like: bucket width, bucket capacity backhoe, tear-out force, tear-out force backhoe, max. reach horizontal, dredging depth, max. discharge height, travel speed, model series, dimension lxwxh, max. torque, no. of cylinders...

More technical details, like: bucket width, bucket capacity backhoe, tear-out force, tear-out force backhoe, max. reach horizontal, dredging depth, max. discharge height, travel speed, model series, dimension lxwxh, max. torque, no. of cylinders, cylinder bore x stroke, emission level, backhoe type, engine manufacturer, engine model, emission rating, aspiration, rated speed, engine output - net, engine output - gross, transmission type, number of travel speeds, drive - 2wd / 4wd, length - roading, height - over cab, maximum height, width, ground clearance, width - standard shovel, stabiliser type, maximum dig depth - longest dipper, dig depth - sae, dig depth - sae retracted dipper, dig depth - sae extended dipper, reach from slew pivot - non-extending dipper, reach from slew pivot - retracted dipper, reach from slew pivot - extended dipper, loading height - non-extending dipper, loading height - retracted dipper, loading height - extended dipper, dump height - general purpose, dump angle - general purpose, dump height - multi-purpose, dump angle - multi-purpose, fuel tank, shovel capacity - standard general purpose, shovel capacity - multi-purpose, bucket tearout - non-extending dipper, dipper tearout - non-extending dipper, shovel breakout - general purpose, shovel breakout - multi-purpose, operating weight are available in the full technical specs.

Basic model incl. ROPS cabin, standard shovel, rear with backhoe and standard bucket

Special equipment

Outrigger stabilisers: No
Clamshell: No
Forklift utility: No
Grabber: No
Diesel particulate filter: No
Aircondition: No

Terex-Fermec 980 FAQ

When was the Terex-Fermec 980 manufactured?

The Terex-Fermec 980 was manufactured from 2004 to 2006.

How much does the Terex-Fermec 980 weigh?

The Terex-Fermec 980 weighs 8.5 tons.

What are the transport dimensions of the Terex-Fermec 980 backhoe loader?

The Terex-Fermec 980 has a transport length of 6.21 meters, a transport width of 2.38 meters, and a transport height of 3.8 meters.

What are the undercarriage specifications of the Terex-Fermec 980 backhoe loader?

The Terex-Fermec 980 backhoe loader has an all-wheel drive system and is equipped with standard tyres sized 16.9x24.

What is the bucket capacity of the Terex-Fermec 980 backhoe loader?

The Terex-Fermec 980 backhoe loader has a bucket capacity of 1.2 cubic meters.

How much is a Terex-Fermec 980 Backhoe loader (2004u20132006) worth?

The residual value of the Terex-Fermec 980 depends on the machine's individual parameters. Visit the LECTURA Valuation to check it.

Machine inspection

Ask for inspection of your Terex-Fermec 980 from experts

Mevas is an international operating inspection service for used heavy machinery. Construction machinery inspectors are available in more than 20 countries.

Use this service to minimise the risk when buying used equipment. An inspection by Mevas costs less than repairing a defective hydraulic cylinder.

Enquire machine inspection

Provided by:

Buy & Rent

Compare Terex-Fermec 980 with similar Backhoe Loaders

Terex-Fermec 980

Weight:: 8.5 t

Standard tyres:: 16.9x24

Bucket capacity:: 1.2 m³

Drive:: A

New Holland 655 D

Weight:: 7.52 t

Standard tyres:: 16.5/85-28

Bucket capacity:: 1 m³

Drive:: H

Hydrema H 906 E-ESD

Weight:: 9.2 t

Standard tyres:: 500/70x28

Bucket capacity:: 1.4 m³

Drive:: A

Terex-Fermec 760

Weight:: 8.2 t

Standard tyres:: 16.9x30

Bucket capacity:: 1 m³

Drive:: A

Fiat-Hitachi FB 100

Weight:: 8.1 t

Standard tyres:: 18.4-26/12.5-80

Bucket capacity:: 1 m³

Do you want to see more detailed comparison?

Show me!

Sell Terex-Fermec 980

Backhoe Loaders appraisal with LECTURA Valuation

Whether you need to calculate value of your Terex-Fermec 980 or valuation of your Backhoe Loaders fleet, LECTURA Valuation will help. Simply fill the machine details and see the pricing information for Backhoe Loaders in few clicks.

Valuate right now!

Data provided by

Spare parts & Components

Get spare parts for Terex-Fermec 980 easily from our partners

Do your lookup for high quality parts for Terex-Fermec 980 online!
With a few, easy steps, you will find generic and genuine parts and replacements in well-catalogued lists. Wether you are dealer or an owner, LECTURA can lead you to the right direction.
Check the best offers from our partners and order the Backhoe Loaders spare parts easily today - worldwide.

Get parts for Terex-Fermec 980 now!

Transport

Backhoe Loaders Transport & Shipping Services

In case you look for a transport your machine, apply our services. Query the ideal transport quotes for Backhoe Loaders formed on transport dimensions and weights. Our partners provide large-scale services to meet your wishes.

Ask for transport price